Sale
Allows over 10kg/22lb of weight for practice at home of in your studio on larger Steadicam systems ...
Custom Steadicam Heavy Duty Stand with 16mm spigot.
Sale
3-Section Gas-Lift Monopod, Höheneinstellung mit dem Fußpedal ...
Replacement Pull Pin for \LX and Zephyr/Aero30 Vest.
Press fit. 1x supplied. *You will need a mechanical press or vice to install this item.
Press fit. 1x supplied. *You will need a mechanical press or vice to install this item.
Steadicam Rain Cover for Ultra 2 and Clipper 2 Stabilisation Systems (FGS-900160) ...
Support Block, Pull PIN - 802-7824
Lens height above Steadicam arm typically 575mm (22 5/8 inch). With the new Upside-Down adapter the Lens height is 395mm / 15 1/2 inches
Arm protective covers (2-pieces), for G-70 arm, G-50, G-40, Zephyr and Flyer arm ...
24V 3-pin Lemo Open End Power Cable (802-0046) ...
The Volt Rain Cover is designed to protect your Volt and Gimbal from the elements, while allowing you to operate your Steadicam. Made from motorcycle grade, waterproof fabric, with Velcro seals. Fits all sled posts 1.5”-1.85”
Allows over 10kg/22lb of weight for practice at home of in your studio on larger Steadicam systems ...
Zhiyun Crane 3 Lab Kit (Adapter) kompatibel mit Steadimate-S ...
THIS ROD MOUNT BRACKET CAN MOUNT DIRECTLY TO THE VOLT CONTROL BOX OR
TO THE 817-7915 VOLT CONTROL BOX & MDR MOUNTING PLATE FOR PRO. USE WITH SHADOW, ARCHER AND NON STEADICAM SYSTEMS.
TO THE 817-7915 VOLT CONTROL BOX & MDR MOUNTING PLATE FOR PRO. USE WITH SHADOW, ARCHER AND NON STEADICAM SYSTEMS.
Tool Kit Bag (FFR-000013) with Steadicam logo...
Lower your camera POV on your Steadicam with this Steadicam Low Mode Kit with F-Bracket and Handle Clamp.
Replacement Ratchet Straps suitable for: Ultra - LX - Zephyr and Master Vest. Vest Ratchet Strap - MSC-079901
Replacement Ratchet Straps suitable for: Ultra - LX - Zephyr and Master Vest. Vest Ratchet Strap - MSC-079901
Longer handle for Steadicam M1 gimbal, adding an additional 1" to standard length.
Suitable for 3/4" Arm posts. *Allow 7 days for dispatch.
Suitable for 3/4" Arm posts. *Allow 7 days for dispatch.
Hard Mount Kit for Steadycam Arm
Steadicam Saddle Type Sand Bag (FFR-000014). Saddle type sand bag with Steadicam logo.
Sale
Stativzapfen, Adapter Pin für Steadicam Docking Bracket (16/28,5mm)
sdv-Volt Elektronische Handheld Stabilisator für iPhone 7/7 Plus und GoPro Hero5 Kamera, schwarz ...
BRACKETS MOUNT THE VOLT CONTROL BOX TO ANY EXISTING PRESTON MDR-3
CONTROLLER. NOTE: IT'S IMPORTANT THAT THE MDR-3 BE SECURELY MOUNTED TO THE RIG VIA A ROD OR
BRACKET MOUNTING SYSTEM BEFORE MOUNTING VOLT CONTROL BOX. USE: ALL SYSTEMS
CONTROLLER. NOTE: IT'S IMPORTANT THAT THE MDR-3 BE SECURELY MOUNTED TO THE RIG VIA A ROD OR
BRACKET MOUNTING SYSTEM BEFORE MOUNTING VOLT CONTROL BOX. USE: ALL SYSTEMS
GPI Pro Universal Volt Mounting Plate for the Preston MDR2 and 3. Fits to the underside of the Volt Control box for mounting Preston 2 & 3, from the Pro Diving Board.
Wie bieten Zubehör für alle Rig Systeme von Steadicam. Fragen Sie uns, sollten Sie ein Teil für Ihr System nicht in unserem Shop finden. Als offizieller Händler für Steadicam Produkte, bieten wir das komplette Sortiment an.
