Arm X1 can lift 32kg ( 70.4 lbs) with an ultimate maximum payload of 34kg (74.9 lbs).
The SM7-PRO-3G also features a new internally developed communication protocol called XTBus that will allow you to connect new products in a dedicated network where they can share information and data.
Compatible with all ArmX1 ever manufactured, it can let you mount the J-Bracket or U-Bracket (regular or upside-down) lower than 254mm / 10", respect standard ArmPost.
SMARTCAM Vest Lite for Select Camera Stabilizer Arm Systems, the lightest vest on the market: just 2.9kgs (6.4 lbs) ...
Monitor mount derived from SmartCAM Matrix Extreme Sled
Clearly visible under Sunlight, Equipped with a 7" Ultra Hyper Bright LCD panel with an outstanding brightness of up to 3200 nits and a native resolution of 1920 x 1200 with a contrast ratio of 1200:1
it matches perfectly the weight of the standard counterweight with the ability to precisely tuning the position of the outer bell increasing the momentum on the gimbal handle.
J-Bracket with 5/8" arm post designed for steadicam® M2 Gimbal- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ...
compatible with: SmartSystem X1, PRO® GPI® Titan® and Atlas®, FlowCine® XArm®, Steadicam arms with 5/8 arm post ...
ARM POST 5/8IN – STICK OUT 90MM / 3.5IN
15mm high modulus Carbon Fiber rod.M8 male front threaded for a stable connection with Matrix Threaded bracket
Monitor rods with clamp designed to fit Matrix sled posts (1.57" / 40mm)The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Bracket specifically design to grant a stable and vibration-free connection between Volt® Brain and Matrix top stage ...
ArmX1 arm post with 1/2″ diameter and stickout of 140mm / 5.5″
With this kit, it is possible to transform the standard ArmX1 Arm Post into a free-spinning friction-less Arm Post ...
Vlock plate addon kit for SmartSystem monitors: SM7-3K and SM7-3K-Z
Ultra rigid Hard mount compatible with every stabilizer arm based on the industry standard mating block. Hard Mount with Mitchell and Tube Attachment - SKU: 000007111
Especially designed for Matrix R2 Lite in “Ronity” configuration
Dual battery pack for Vlock Batteries with integrated electronics for Matrix Sleds
The ArmX1 Rain Cover is like a soft a comfy “blanket” for your Arm.
Compatible with major plates on the market. Cartoni, Sachtler, Manfrotto, etc…
It can be used to power the following products
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Docking rings for Matrix sled compatible with Matrix Sled Docking Bracket only.
The new SmartSystem SmartCAM TEMPO is an SDI splitter featuring a rugged aluminum design. It supports 12G SDI inputs, offers two SDI outputs, and has a built-in OLED screen to display signal information and diagnostic data ...
SmartSystem produces professional Stabilizers, X1 Arm, advanced Motion Control for Film Makers and Video Makers, Camera Slider, Camera Dollies ...
