Professional gimbal with dual bearings configuration for every axis
Reduce to zero the play of the yaw axis when the in-built Ronin2 locking system is engaged.
Counterweight plate designed to add mass on the bottom of your Matrix R2 ...
Counterweight plate with 10x counterweights included specifically designed
Professional gimbal with dual bearings configuration for every axis of rotation (TILT-ROLL-YAW ...
Technical Note : In case of emergency, it can be replaced with a commercial knob with M6 x10 threading
Counterweight designed to add mass on the bottom of your Matrix Sled if necessary.
LCD Monitor Attachment derived from Matrix Sled.
Equipped with Gimbal lock (including retaining pin)
Plastic Gimbal
5/8" pin to balance your Sled
Support for vest
Support for Arm
Plastic Gimbal
5/8" pin to balance your Sled
Support for vest
Support for Arm
MATRIX DOVETAIL CAMERA PLATE [STANDARD], Length : 6.7inches (170mm)
![Smartsystem Matrix Dovetail Camera Plate [Long – 13inches] +](https://cdn.webshopapp.com/shops/268760/files/393517830/350x298x2/smartsystem-matrix-dovetail-camera-plate-long-13in.jpg)
Long Dovetail camera plate for Matrix Sleds, Length : 13 inches (330mm)
Especially designed for Matrix R2 Lite in “Ronity” configuration
compatible with: SmartSystem X1, PRO® GPI® Titan® and Atlas®, FlowCine® XArm®, Steadicam arms with 5/8 arm post ...
Dual battery pack for Vlock Batteries with integrated electronics for Matrix Sleds
Dual battery pack for 3Studs Batteries with integrated electronics ...
C-BATTERY V-LOCK MOUNT W/ ADAPTER
A fully insulated Rain Suit for ArmX1.
The ArmX1 Rain Cover is like a soft a comfy “blanket” for your Arm.
ARM POST 5/8IN – STICK OUT 90MM / 3.5IN
ARM POST 5/8IN – STICK OUT 40MM / 1.5IN
ARM POST 5/8IN – STICK OUT 190MM / 7.5IN
ARM POST 5/8IN – STICK OUT 140MM / 5.5IN
ARM POST 3/4IN – STICK OUT 90MM / 3.5IN
ARM POST 3/4IN – STICK OUT 40MM / 1.5IN
