For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum.
Geared motor mount, Motor & Pully for Dana Dolly ...
Works with Select Kessler Crane Motors, this Kessler Crane Motor Mount allows for mounting elektraDrive, CineDrive, and Second ...
the ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
the ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
CL-UC1, Olympus connector supports:
CL-UC1, Olympus connector supports Olympus: E520 E510 E420 E410 E300,SP-570 UZ,SP-560 UZ,SP-550UZ,SP-510 UZ.
CL-UC1, Olympus connector supports Olympus: E520 E510 E420 E410 E300,SP-570 UZ,SP-560 UZ,SP-550UZ,SP-510 UZ.
CL-CB1, Olympus connector supports: Olympus: E1,E3,E10,E20,E30.
CL-S1, Sony connector supports:
Sony a900, Sony a700, Sony a350, Sony a300, Sony a200, Sony a100, Sony a100K, a100,a77,a65,a57,a55,a37,a35,a33, a99
Sony a900, Sony a700, Sony a350, Sony a300, Sony a200, Sony a100, Sony a100K, a100,a77,a65,a57,a55,a37,a35,a33, a99
Nikon CL-DC2 connector supports:
D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3100, D600, D610, D90, Z6, Z7
D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3100, D600, D610, D90, Z6, Z7
Nikon CL-DC1 connector supports: Nikon D70, D80
Nikon CL-DC0 (10-Pin) connector supports:
Nikon D1H, D1X, D2H, D2X, D2Xs, D2Hs, D200, D3, D4, D4s, D300, D700, D800, D810, D850, F90x, F90, F100, F6, F5 Kodak DCS-14n Fujifilm S3 Pro, S5 Pro
Nikon D1H, D1X, D2H, D2X, D2Xs, D2Hs, D200, D3, D4, D4s, D300, D700, D800, D810, D850, F90x, F90, F100, F6, F5 Kodak DCS-14n Fujifilm S3 Pro, S5 Pro
Alpha a9, a7, a7 II, a7 III, a7R, a7R II, a7R III, a7S, a7S II, a6500, a6400, a6300, a6000, a5100, a5000, a3000, a77 II, a58
Cyber-shot RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VI, RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II ...
Cyber-shot RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VI, RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II ...
1DX Mark II, 1D X, 1D C, 1Ds Mark III, 1Ds Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5DS R, 5DS, 5D Mark IV, 5D Mark III, 5D Mark II, 5D, 50D, 40D, 30D, 20D, 10D, 6D Mark II, 6D, 7D Mark II, 7D
This cable connects a WeMacro Rail Motor (not included) to an external motor port on your ST4/ST4.3. This cable is 4.9 feet in length.
This is a custom cable that runs from the Spectrum ST4's i/o port to the Nodo Inertia Wheels Receiver (RX).
This is a 6 foot DC extension cable: 2.1mm male/female, straight plugs, black, 18AWG. This extension cable is used to add additional length between your battery and your TB3 or to extend your ST4 AC/DC adapter.
150mm arca compatible plate works with arca clamps. Mount this plate to the bottom of your camera or slider ...
IFOOTAGE EXTENSION TUBE KIT - ST4MAC_IF6
Do you want your Spectrum to work with an external trigger? Now it can! This cable connects from your compatible camera to your Spectrum ST4's i/o port.
The eMotimo 100mm arca compatible plate works with arca clamps ...
This simple four wire cable is great for connecting a stepper motor ...
MICRO USB TO USB CHARGING CABLE FOR PS4 DUALSHOCK CONTROLLER
5:1: Fast enough for video but can't do slopes - Good for interviews ...
This plate allows for the lowest possible mounting profile of an eMotimo Spectrum ST4 to a Dana Dolly ...
