Volt und accessories

Sortieren nach:

All new, re-designed pulley wheel for the Steadicam Volt enabled gimbal. Reinforced and lower profile side walls.
€79,50 *
* exkl. MwSt. zzgl. Versandkosten
sdv-Volt Elektronische Handheld Stabilisator für iPhone 7/7 Plus und GoPro Hero5 Kamera, schwarz ...
€235,00 (€245,00 / ) *
* exkl. MwSt. zzgl. Versandkosten
THIS ROD MOUNT BRACKET CAN MOUNT DIRECTLY TO THE VOLT CONTROL BOX OR
TO THE 817-7915 VOLT CONTROL BOX & MDR MOUNTING PLATE FOR PRO. USE WITH SHADOW, ARCHER AND NON STEADICAM SYSTEMS.
€175,00 *
* exkl. MwSt. zzgl. Versandkosten
Nose Box Rod Mount Bracket #800-7910 ...
€265,00 *
* exkl. MwSt. zzgl. Versandkosten
BRACKETS MOUNT THE VOLT CONTROL BOX TO ANY EXISTING PRESTON MDR-3
CONTROLLER. NOTE: IT'S IMPORTANT THAT THE MDR-3 BE SECURELY MOUNTED TO THE RIG VIA A ROD OR
BRACKET MOUNTING SYSTEM BEFORE MOUNTING VOLT CONTROL BOX. USE: ALL SYSTEMS
€275,00 *
* exkl. MwSt. zzgl. Versandkosten
3rd Battery Mount Kit for the base of our Steadicam sleds. Includes switching for 12/24v and connects into the sleds power harness ...
€1.175,00 *
* exkl. MwSt. zzgl. Versandkosten
Send tally status to your Steadicam monitor when it is installed on a Steadicam sled with this Tally Cable with Sensor and Repeater from Steadicam.
€345,00 *
* exkl. MwSt. zzgl. Versandkosten
The Volt Rain Cover is designed to protect your Volt and Gimbal from the elements, while allowing you to operate your Steadicam. Made from motorcycle grade, waterproof fabric, with Velcro seals. Fits all sled posts 1.5”-1.85”
€275,00 *
* exkl. MwSt. zzgl. Versandkosten
All new, re-designed pulley wheel for the Steadicam Volt enabled gimbal. Reinforced and lower profile side walls.
€54,50 *
* exkl. MwSt. zzgl. Versandkosten
M1 Internal Volt Sensor - Volt Pan Encoder Sensor
€465,00 *
* exkl. MwSt. zzgl. Versandkosten
M2 Internal Volt Sensor - Volt Pan Encoder Sensor / VOLT PAN SENSOR, M2 GIMBAL spare
€465,00 *
* exkl. MwSt. zzgl. Versandkosten
GPI Pro Universal Volt Mounting Plate for the Preston MDR2 and 3. Fits to the underside of the Volt Control box for mounting Preston 2 & 3, from the Pro Diving Board.
€185,00 *
* exkl. MwSt. zzgl. Versandkosten
Volt Control Box Rod Mount 60mm x 15mm, For mounting the external Volt Control Box to 15mm bars ...
€145,00 *
* exkl. MwSt. zzgl. Versandkosten
Volt 44" Spezial Steuerkabel mit 8P Lemo Winkel - 8P Lemo
€410,00 *
* exkl. MwSt. zzgl. Versandkosten
Full Sized Steadicam Dovetail Camera Plate. Slightly thicker & stiffer than the traditional Ultra camera plate and with more "logical" hole & slot placement for modern cameras.
€475,00 *
* exkl. MwSt. zzgl. Versandkosten
Suitable for all Volt versions. M-Series, Volt-1.5 Gimbal . Shadow, Archer2, GPI Pro,
Betz Rig
€9,80 *
* exkl. MwSt. zzgl. Versandkosten
Steadicam Volt-Stromkabel mit flexibler geflochtener Hülle. 10 cm ...
€270,00 *
* exkl. MwSt. zzgl. Versandkosten
Volt Elektronische Handheld Stabilisator für iPhone 7/7 Plus und GoPro Hero5 Kamera ...
€245,00 *
* exkl. MwSt. zzgl. Versandkosten
All new, re-designed pulley wheel for the Steadicam Volt enabled gimbal. Reinforced and lower profile side walls.
€59,50 *
* exkl. MwSt. zzgl. Versandkosten
Volt 28" Spezial Steuerkabel mit 8P Lemo Winkel - 8P Lemo
€398,00 *
* exkl. MwSt. zzgl. Versandkosten
Steadicam Volt power cable with flexible braided sleeve. 10 centimeters
Supplied with 3 pin right angle 0b lemo to select sled connectors ...
€290,00 *
* exkl. MwSt. zzgl. Versandkosten
Stromversorgungskabel Steadicam Master 12V 2pin Lemo - Aladin2 Lemo 0B 2pin
€185,00 *
* exkl. MwSt. zzgl. Versandkosten
Short Nose Box: SHADOW,ULTRA2 & ARCHER2, #800-7415-04
€1.045,00 *
* exkl. MwSt. zzgl. Versandkosten
Mounting Bracket: Brackets Mount the Volt Control Box #817‐7960
€245,00 *
* exkl. MwSt. zzgl. Versandkosten
* exkl. MwSt. zzgl. Versandkosten

Steadicam Volt™ System ; a tool that provides Steadicam operators with horizontal stabilization, giving them the ability to easily transition between fully manual and auto assist modes. Weighing only two pounds, the Volt System seamlessly integrates into an existing sled, providing greater opportunity for content creation without jeopardizing stability.

The Steadicam M1-Volt Evolution continues with the addition of Steadicam Volt -Powered Gimbal upgrades for the Steadicam Archer2, Shadow and Shadow-V, as well as Steadicam Ultra2 and Clipper3 models. Volt for the GPI Pro systems will soon be available as well for both the Pro and Cine-Live models and can be purchased as a retrofit for the GPI Pro gimbal, or as a complete system with a M1-type gimbal for 1.5” post. The two pound Volt system is unique  in that it mounts directly to the gimbal, therefore adding no weight or height to the stage or base.  Garrett Brown, Inventor of the Steadicam said “This is the most significant advancement in operating since the invention of the Steadicam over 40 years ago”.

 

 

 

 

 

 

 

 

Wir benutzen Cookies nur für interne Zwecke um den Webshop zu verbessern. Ist das in Ordnung? Ja Nein Für weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x