xLine Accessories

Sortieren nach:

CF Spart Mount Plate ...
€75,00 *
* exkl. MwSt. zzgl. Versandkosten
The xARM Waterproof cover, is our thinnest and softest cover for the xARM. Its inner fleece material keeps the xARM intact from anything that might rub against it.
€99,00 *
* exkl. MwSt. zzgl. Versandkosten
The low mode grip handle allows for more comfortable hand placement for the operators control hand when working in low mode. Instead of controlling the gimbal handle, the operator have the option to have better reach and control using this grip handle.
€175,00 *
* exkl. MwSt. zzgl. Versandkosten
The Super-high/low mode link bracket, joins two arm posts with a lockable link, allowing the long and regular arm posts to be used both in high mode and low mode.
€155,00 *
* exkl. MwSt. zzgl. Versandkosten
The angled low mode bracket is used join various extended length xARM arm posts with a normal arm post, at a 15 degree angle.
€190,00 *
* exkl. MwSt. zzgl. Versandkosten
The kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.
€425,00 *
* exkl. MwSt. zzgl. Versandkosten
The kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.
€425,00 *
* exkl. MwSt. zzgl. Versandkosten
The kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.
€425,00 *
* exkl. MwSt. zzgl. Versandkosten
The xR3ACH Waterproof cover, is our thinnest and softest cover for the xR3ACH back mount. Its inner fleece material keeps the back mount protected from anything that might rub or scratch against it.
€110,00 *
* exkl. MwSt. zzgl. Versandkosten
The Winter softshell cover is a neoprene cover that keeps your xR3ACH performing at its best at sub-zero temperature (0C/32F down to -20C/-4F).
€149,00 *
* exkl. MwSt. zzgl. Versandkosten
52 to 64 lb Load Capacity Range, Change Core for Different Weight Setup, Pre-Extended for Quick Change ...
€545,00 *
* exkl. MwSt. zzgl. Versandkosten
44.5 to 56 lb Load Capacity Range, Change Core for Different Weight Setup, Pre-Extended for Quick Change ...
€545,00 *
* exkl. MwSt. zzgl. Versandkosten
37 to 49.5 lb Load Capacity Range, Change Core for Different Weight Setup, Pre-Extended for Quick Change ...
€545,00 *
* exkl. MwSt. zzgl. Versandkosten
31 to 43 lb / 14 bis 19.5 Kg Load Capacity Range, Change Core for Different Weight Setup.
Pre-Extended for Quick Change ...
€545,00 *
* exkl. MwSt. zzgl. Versandkosten
17.5 to 31 lb Load Capacity Range - Change Core for Different Weight Setup - Pre-Extended for Quick Change ...
€545,00 *
* exkl. MwSt. zzgl. Versandkosten
The xARM is based on polymer spring cores with a outer shell of Neoprene. Each spring core has a smooth and linear lifting capacity and when being used near their maximum ...
€545,00 *
* exkl. MwSt. zzgl. Versandkosten
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″.
€625,00 *
* exkl. MwSt. zzgl. Versandkosten
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″.
€625,00 *
* exkl. MwSt. zzgl. Versandkosten
The xDROP, is a new male socket block-to-female socket block connection bracket, that drops the arm connection to the vest approx 85mm or 3.4″ and offsets the same connection to the side 55mm or 2.2″.
€625,00 *
* exkl. MwSt. zzgl. Versandkosten
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″.
€625,00 *
* exkl. MwSt. zzgl. Versandkosten
The xPEG Rip-Tie also comes with a ⅜”-16 UNC threaded hole, if the user wishes to mount anything else on it (such as a eyebolt, for example).
€135,00 *
* exkl. MwSt. zzgl. Versandkosten
The xSOCKET, is a universal female socket block that works on all universal Steadicam type vests, such as Tiffen(R) Exovest, GPI PRO(™) vests and all universal socket block Steadicam type arms.
€310,00 *
* exkl. MwSt. zzgl. Versandkosten
The xPEG is a hook that you mount on your cart, where you can hang your Steadicam arm.
The xPEG Rip-Tie allows the operator to tighten up the arm at the bottom shelf of the cart.
€245,00 *
* exkl. MwSt. zzgl. Versandkosten
* exkl. MwSt. zzgl. Versandkosten
Wir benutzen Cookies nur für interne Zwecke um den Webshop zu verbessern. Ist das in Ordnung? Ja Nein Für weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x