Flowcine high quality accessories

Sortieren nach:

Weighing in at only 3.5kg (7.71lbs), the Neo is one of the lightest arms on the market while at the same time being stronger, more rigid and has more linear performance than its predecessor.
€8.880,00 (€10.450,00 / ) *
* exkl. MwSt. zzgl. Versandkosten
Tranquilizer is the next-generation of vibration isolators, specifically designed around the geometry of a electronic gimbal device.
€1.650,00 *
* exkl. MwSt. zzgl. Versandkosten
xARM Double-Section Articulated Stabilization Arm. Add a heavy-duty stabilization arm to your vest and gimbal rig with the xARM Double-Section Articulated Stabilization Arm from FLOWCINE to achieve smooth, professional motion shots.
€17.425,00 *
* exkl. MwSt. zzgl. Versandkosten
The new hybrid back mount, giving you greater boom range and more stabilization!
€6.490,00 *
* exkl. MwSt. zzgl. Versandkosten
The xSPINE vest is the world’s first universal vest made for all kinds of camera operators in mind, made for versatility and moveability. The xSPINE can currently be used for Steadicam™ operation both as front and back mount in various configurations.
€9.170,00 *
* exkl. MwSt. zzgl. Versandkosten
xSPINE vest + Front mount ...
€4.560,00 *
* exkl. MwSt. zzgl. Versandkosten
The xSPINE Cinema 2.5 / 3 mount allows an operator to quickly connect a Easyrig support bar to the back of the xSPINE using tool-less locks for quick mounting / dismounting.
€420,00 *
* exkl. MwSt. zzgl. Versandkosten
For Black Arm 3-Axis Stabilizer, Replacement Tilt Arm Dampener, Use for Extra Dampening
The Black Arm Tilt Dampener from FLOWCINE can be used as a replacement component in your Black Arm stabilizer ...
€185,00 *
* exkl. MwSt. zzgl. Versandkosten
The FLOWCINE Black Arm Roll Dampener replaces the existing roll dampener of your FLOWCINE Black Arm stabilizer system.
€185,00 *
* exkl. MwSt. zzgl. Versandkosten
The GLINK docking station tool rack is a clean way to store your tools on the docking station.
€70,00 *
* exkl. MwSt. zzgl. Versandkosten
The new hybrid back mount, giving you greater boom range and more stabilization!
€6.490,00 *
* exkl. MwSt. zzgl. Versandkosten
xSPINE Support Vest for All Body Sizes, xR3ACH Heavy-Duty Stabilization Arm, Front Mount for xSPINE, xR3ACH Comes in Regular Left-Side Setup
€9.605,00 *
* exkl. MwSt. zzgl. Versandkosten
Sale
articulated stabilization arm, xR3ACH is a groundbreaking new hybrid back mount, that not only serves as a back mount ...
€5.900,00 UVP €5.750,00 *
* exkl. MwSt. zzgl. Versandkosten
GLINK ein neuartiges Gimbalsystem, nutzbar für elektronische Gimbals wie das Freefly M10, M15, MoVI Pro und auch DJI Ronin 2 System.
€4.745,00 *
* exkl. MwSt. zzgl. Versandkosten
The new hybrid back mount, giving you greater boom range and more stabilization!
€6.490,00 *
* exkl. MwSt. zzgl. Versandkosten
Capture professional, smooth camera movements by flying your rig with the xSPINE Vest, Front Mount, and xARM Stabilization System from FLOWCINE. The camera's weight is distributed to the shooter's torso ...
€13.750,00 *
* exkl. MwSt. zzgl. Versandkosten
Sale
xSPINE + xBONE CF + Front mount + xARM - FC-X-xSPINE-xBCF-Frnt-xARM
€15.255,00 UVP €14.850,00 *
* exkl. MwSt. zzgl. Versandkosten
Stabilizer Rig for All Body Sizes, Heavy-Duty Gimbal Stabilization Arm, Dual-Layered Air Mesh System, QR Pins, Can Be Mounted Regular or Goofy
€17.425,00 *
* exkl. MwSt. zzgl. Versandkosten
37 to 49.5 lb Load Capacity Range, Change Core for Different Weight Setup, Pre-Extended for Quick Change ...
€545,00 *
* exkl. MwSt. zzgl. Versandkosten
This is the ultimate bundle, the xARM and the xR3ACH. The xARM, being one of the smoothest arms on the market, and the added boom range and isolation of the xR3ACH will ensure a super smooth ride ready to take on almost any shot.
€15.245,00 *
* exkl. MwSt. zzgl. Versandkosten
The xPEG is a hook that you mount on your cart, where you can hang your Steadicam arm.
€135,00 *
* exkl. MwSt. zzgl. Versandkosten
The new hybrid back mount, giving you greater boom range and more stabilization!
€6.490,00 *
* exkl. MwSt. zzgl. Versandkosten
Camera operators who would like to attach a stabilization arm to their xSPINE vest can do so via this xBONE CF Back Mount from FLOWCINE, which extends a standard universal socket block to the shooter's left or right
€1.745,00 *
* exkl. MwSt. zzgl. Versandkosten
Stabilizer Rig for All Body Sizes, Heavy-Duty Gimbal Stabilization Arm, Dual-Layered Air Mesh System, QR Pins, Can Be Mounted Regular or Goofy
€6.150,00 *
* exkl. MwSt. zzgl. Versandkosten
* exkl. MwSt. zzgl. Versandkosten

About Flowcine

Flowcine is about producing high quality accessories for professional photographers.

All of us have been working in film and TV production for years, and by now we have a good grip on what products are missing on the market. Stuff we wanted on set for our own productions. So we decided to start Flowcine, and put those missing products on the market.

We’re always aiming on simplicity. Stuff that just works when you’re on set. We’re working on solving common problems photographers have while using an Easyrig or working handheld

Wir benutzen Cookies nur für interne Zwecke um den Webshop zu verbessern. Ist das in Ordnung? Ja Nein Für weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x