works also with: Clipper 312, Clipper 324and Clipper 2 ...
801-7291 is a kit for adaptation to an arm and vest upgrade ...
Replacement Ratchet Straps suitable for: Ultra - LX - Zephyr and Master Vest. Vest Ratchet Strap - MSC-079901
Short Dovetail plate for Steadicam M-1. With machined recesses for the M1 feet. Useful slots for 1/4-20 and 3/8" camera screws. Designed for the M1 slim 3rd battery mount, ...
Volt Control Box Rod Mount 60mm x 15mm, For mounting the external Volt Control Box to 15mm bars ...
Replacement camera mounting pin for camera mounting plate assembly (601-7412 and 802-7417). The pin screw is compatible with Clipper 2, Clipper, Vector and Archer_2S.
Send tally status to your Steadicam monitor when it is installed on a Steadicam sled with this Tally Cable with Sensor and Repeater from Steadicam.
This is a Panasonic D28 Battery Mount from Steadicam designed to attach to the Steadicam AERO 15 or AERO 30 Stabilizer and support Panasonic D28 batteries to power the stabilizer.
15mm Low Mode Bracket for Transvideo - 815-7526
Arm Post Size 6" to 3/4" Top - 800-7204
Sale
Replacement Pull Pin for \LX and Zephyr/Aero30 Vest.
Press fit. 1x supplied. *You will need a mechanical press or vice to install this item.
Press fit. 1x supplied. *You will need a mechanical press or vice to install this item.
The official Steadicam Baseball Cap ...
Support Block, Pull PIN - 802-7824
Arm Hanger Pin for use with the Steadicam Padded Docking Bracket. Attaches with 1/4-20" thread. Now with stainless steel pin, and suitable for smaller diameter arm hollow posts.
Replacement pivot shaft for the Flyer, Zephyr and Scout Gimbal.
Bearings for the pivot shaft (each) - There are 2x in the handle.
Bearings for the pivot shaft (each) - There are 2x in the handle.
Small Vest Socket Block - 803-7801
Small Socket Block for 801-7804 for: Aero15; Pilot, Merlin Vest ...
M-Series, for all M-Series Gimbals including 1.5 variants. Shadow & Archer2
Monitor Halter für Aero & Zephyr Systeme 825-7500
Accessory Type: Counterweight / Middle Weight with O-Ring for Stabilisation Systems
Lens height above Steadicam arm typically 575mm (22 5/8 inch). With the new Upside-Down adapter the Lens height is 395mm / 15 1/2 inches
Ronin SC Adapter nutzbar mit Steadimate-S System/adapter
Steadicam Saddle Type Sand Bag (FFR-000014). Saddle type sand bag with Steadicam logo.
Steadicam Rain Cover for Ultra 2 and Clipper 2 Stabilisation Systems (FGS-900160) ...
Wie bieten Zubehör für alle Rig Systeme von Steadicam. Fragen Sie uns, sollten Sie ein Teil für Ihr System nicht in unserem Shop finden. Als offizieller Händler für Steadicam Produkte, bieten wir das komplette Sortiment an.
