3-Section Gas-Lift Monopod, Höheneinstellung mit dem Fußpedal ...
Allows over 10kg/22lb of weight for practice at home of in your studio on larger Steadicam systems ...
Custom Steadicam Heavy Duty Stand with 16mm spigot.
Handles on top and side, Backpack straps behind zip Wall ...
sdv-Volt Elektronische Handheld Stabilisator für iPhone 7/7 Plus und GoPro Hero5 Kamera, schwarz ...
24 volt power cable with one 3-pin Lemo connector and open end ...
geeignet für den Aero 15 / 30 Arm Zephyr / Solo Arm ...
Ronin SC Adapter nutzbar mit Steadimate-S System/adapter
Nose Box Rod Mount Bracket #800-7910 ...
Hard Case for Zephyr Sled only 011-0435.
This is a hard case for the Zephyr sled which is only to be used with the Tango system.
This is a hard case for the Zephyr sled which is only to be used with the Tango system.
F Bracket für Archer, Flyer und Pilot Stabilisation Systems (300-7901) ...
Replacement Ratchet Straps suitable for: Ultra - LX - Zephyr and Master Vest. Vest Ratchet Strap - MSC-079901
15mm bar mounting low mode bracket for the Transvideo Starlight Monitor.
Fits Steadicam stage bars from M-Series and Nosebox brackets with Volt Conversions:
Fits Steadicam stage bars from M-Series and Nosebox brackets with Volt Conversions:
Send tally status to your Steadicam monitor when it is installed on a Steadicam sled with this Tally Cable with Sensor and Repeater from Steadicam.
Heavy-duty, large, durable holdall bag in Cordura for vest / arm & docking bracket, with shoulder strap ...
THIS ROD MOUNT BRACKET CAN MOUNT DIRECTLY TO THE VOLT CONTROL BOX OR
TO THE 817-7915 VOLT CONTROL BOX & MDR MOUNTING PLATE FOR PRO. USE WITH SHADOW, ARCHER AND NON STEADICAM SYSTEMS.
TO THE 817-7915 VOLT CONTROL BOX & MDR MOUNTING PLATE FOR PRO. USE WITH SHADOW, ARCHER AND NON STEADICAM SYSTEMS.
Socket Block for Flyer Vest (803-7801) - used on vest bridge assembly for connecting vest and arm. It is on Flyer vest.
Tool Kit Bag (FFR-000013) with Steadicam logo...
Short Dovetail plate for Steadicam M-1. With machined recesses for the M1 feet. Useful slots for 1/4-20 and 3/8" camera screws. Designed for the M1 slim 3rd battery mount, ...
3rd Battery Mount Kit for the base of our Steadicam sleds. Includes switching for 12/24v and connects into the sleds power harness ...
Arm Post 12" to 3/4" Top - 800-7204-01
Replacement thumbscrew for all standard sized sock blocks ...
Small Socket Block for 801-7804 for: Aero15; Pilot, Merlin Vest ...
Lens height above Steadicam arm typically 575mm (22 5/8 inch). With the new Upside-Down adapter the Lens height is 395mm / 15 1/2 inches
Wie bieten Zubehör für alle Rig Systeme von Steadicam. Fragen Sie uns, sollten Sie ein Teil für Ihr System nicht in unserem Shop finden. Als offizieller Händler für Steadicam Produkte, bieten wir das komplette Sortiment an.
