3-Section Gas-Lift Monopod, Höheneinstellung mit dem Fußpedal ...
Allows over 10kg/22lb of weight for practice at home of in your studio on larger Steadicam systems ...
sdv-Volt Elektronische Handheld Stabilisator für iPhone 7/7 Plus und GoPro Hero5 Kamera, schwarz ...
Custom Steadicam Heavy Duty Stand with 16mm spigot.
This is a specially designed bracket for operating Steadicam in low-mode ...
Replacement thumbscrew for all standard sized sock blocks ...
Nose Box Rod Mount Bracket #800-7910 ...
Short Dovetail plate for Steadicam M-1. With machined recesses for the M1 feet. Useful slots for 1/4-20 and 3/8" camera screws. Designed for the M1 slim 3rd battery mount, ...
Send tally status to your Steadicam monitor when it is installed on a Steadicam sled with this Tally Cable with Sensor and Repeater from Steadicam.
This is a Canon LP-E6 Battery Mount from Steadicam designed to attach to the Steadicam AERO 15 or AERO 30 Stabilizer and support Canon LP-E6 batteries to power the stabilizer.
Lens height above Steadicam arm typically 575mm (22 5/8 inch). With the new Upside-Down adapter the Lens height is 395mm / 15 1/2 inches
Zhiyun Crane 3 Lab Kit (Adapter) kompatibel mit Steadimate-S ...
24 volt power cable with one 3-pin Lemo connector and open end ...
geeignet für den Aero 15 / 30 Arm Zephyr / Solo Arm ...
The Volt Rain Cover is designed to protect your Volt and Gimbal from the elements, while allowing you to operate your Steadicam. Made from motorcycle grade, waterproof fabric, with Velcro seals. Fits all sled posts 1.5”-1.85”
Handles on top and side, Backpack straps behind zip Wall ...
Ronin SC Adapter nutzbar mit Steadimate-S System/adapter
THIS ROD MOUNT BRACKET CAN MOUNT DIRECTLY TO THE VOLT CONTROL BOX OR
TO THE 817-7915 VOLT CONTROL BOX & MDR MOUNTING PLATE FOR PRO. USE WITH SHADOW, ARCHER AND NON STEADICAM SYSTEMS.
TO THE 817-7915 VOLT CONTROL BOX & MDR MOUNTING PLATE FOR PRO. USE WITH SHADOW, ARCHER AND NON STEADICAM SYSTEMS.
Volt Elektronische Handheld Stabilisator für iPhone 7/7 Plus und GoPro Hero5 Kamera ...
Hard Case for Zephyr Sled only 011-0435.
This is a hard case for the Zephyr sled which is only to be used with the Tango system.
This is a hard case for the Zephyr sled which is only to be used with the Tango system.
Socket Block for Flyer Vest (803-7801) - used on vest bridge assembly for connecting vest and arm. It is on Flyer vest.
Tool Kit Bag (FFR-000013) with Steadicam logo...
Replacement Ratchet Straps suitable for: Ultra - LX - Zephyr and Master Vest. Vest Ratchet Strap - MSC-079901
Volt Control Box Rod Mount 60mm x 15mm, For mounting the external Volt Control Box to 15mm bars ...
Wie bieten Zubehör für alle Rig Systeme von Steadicam. Fragen Sie uns, sollten Sie ein Teil für Ihr System nicht in unserem Shop finden. Als offizieller Händler für Steadicam Produkte, bieten wir das komplette Sortiment an.
