compatible with: SmartSystem X1, PRO® GPI® Titan® and Atlas®, FlowCine® XArm®, Steadicam arms with 5/8 arm post ...
specifically designed for SM7 PRO 3G, it is possible to mount it on brackets that require central attachment under the monitor.
LCD Bracket (Lateral mount) with Standard Matrix Rods Attachment ...
J-Bracket with 5/8" arm post designed for steadicam® M1 Gimbal- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® - ...
Compatible with all ArmX1 ever manufactured, it can let you mount the J-Bracket or U-Bracket (regular or upside-down) lower than 254mm / 10", respect standard ArmPost.
3Studs plate addon kit for SmartSystem monitors: SM7-3K and SM7-3K-Z
Ultra rigid Hard mount compatible with every stabilizer arm based on the industry standard mating block. Hard Mount with Mitchell and Tube Attachment - SKU: 000007111
A fully insulated Rain Suit for ArmX1.
Compatible with major plates on the market. Cartoni, Sachtler, Manfrotto, etc…
Additional MiniClamp for Zen PRO Core, designed to accommodate rods measuring 16mm (0.625 inches). SKU: 000010272
It minimize the oscillation of Zen due to improper installation granting a more stable behavior especially on low mode.
Docking rings for Matrix sled compatible with Matrix Sled Docking Bracket only.
U-Bracket designed to be compatible with steadicam® M1 gimbalIt let you increase the distance from the arm post and the Sled handle ...
Vlock plate addon kit for SmartSystem monitors: SM7-3K and SM7-3K-Z
Reduce to zero the play of the yaw axis when the in-built Ronin2 locking system is engaged.
Counterweight plate designed to add mass on the bottom of your Matrix R2 ...
Professional gimbal with dual bearings configuration for every axis of rotation (TILT-ROLL-YAW ...
Technical Note : In case of emergency, it can be replaced with a commercial knob with M6 x10 threading
Equipped with Gimbal lock (including retaining pin)
Plastic Gimbal
5/8" pin to balance your Sled
Support for vest
Support for Arm
Plastic Gimbal
5/8" pin to balance your Sled
Support for vest
Support for Arm
The ArmX1 Rain Cover is like a soft a comfy “blanket” for your Arm.
ARM POST 5/8IN – STICK OUT 90MM / 3.5IN
Universal camera plate compatible with most sleds on the market. Equipped with safety locking screws. Total compatibility with VersaHead
Compatible arms:
– SmartSystem Arm X1
– PRO® GPI® Titan® and Atlas® Arms
– FlowCine® XArm®
– Tiffen steadicam® arms with 5/8 arm post
– SmartSystem Arm X1
– PRO® GPI® Titan® and Atlas® Arms
– FlowCine® XArm®
– Tiffen steadicam® arms with 5/8 arm post
U-Bracket designed to be compatible with ARRI® Artemis2/Trinity2. It let you increase the distance from the arm post and the Sled handle giving to you more headroom to install your preferred monitor on this last one.
SmartSystem produces professional Stabilizers, X1 Arm, advanced Motion Control for Film Makers and Video Makers, Camera Slider, Camera Dollies ...
