J-Bracket with 5/8" arm post designed for GPI® PRO Sled- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ....
U-Bracket designed to be compatible with steadicam® M1 gimbalIt let you increase the distance from the arm post and the Sled handle ...
Equipped with Gimbal lock (including retaining pin)
Plastic Gimbal
5/8" pin to balance your Sled
Support for vest
Support for Arm
Plastic Gimbal
5/8" pin to balance your Sled
Support for vest
Support for Arm
Dual battery pack for Vlock Batteries with integrated electronics for Matrix Sleds
A fully insulated Rain Suit for ArmX1.
ARM POST 5/8IN – STICK OUT 190MM / 7.5IN
Monitor mount derived from SmartCAM Matrix Extreme Sled
ARM POST 1/2IN – STICK OUT 40MM / 1.5IN
Universal camera plate compatible with most sleds on the market. Equipped with safety locking screws. Total compatibility with VersaHead ...
It minimize the oscillation of Zen due to improper installation granting a more stable behavior especially on low mode.
Docking rings for Matrix sled compatible with Matrix Sled Docking Bracket only.
Additional Chest pad compatible with Vest Lite.Washing machine proof
V-lock Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY
3Studs Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY
LCD Bracket (Lateral mount) with Standard Matrix Rods Attachment ...
ArmX1 arm post with 1/2″ diameter and stickout of 140mm / 5.5″
With this kit, it is possible to transform the standard ArmX1 Arm Post into a free-spinning friction-less Arm Post ...
comes with: 15mm carbon fiber rods with embedded battery joint, Locking knob, Nylon washer
J-Bracket with 5/8" arm post designed for steadicam® M1 Gimbal- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® - ...
Ultra rigid Hard mount compatible with every stabilizer arm based on the industry standard mating block. Hard Mount with Mitchell and Tube Attachment - SKU: 000007111
Reduce to zero the play of the yaw axis when the in-built Ronin2 locking system is engaged.
Technical Note : In case of emergency, it can be replaced with a commercial knob with M6 x10 threading
Engineered to be lightweight as ultra stable.
SmartSystem produces professional Stabilizers, X1 Arm, advanced Motion Control for Film Makers and Video Makers, Camera Slider, Camera Dollies ...
