Designed for and easy and quick camera swap from Matrix Sled to a tripod
MATRIX DOVETAIL CAMERA PLATE [STANDARD], Length : 6.7inches (170mm)
![Smartsystem Matrix Dovetail Camera Plate [Long – 13inches] - 000008285 +.](https://cdn.webshopapp.com/shops/268760/files/393517830/510x700x2/smartsystem-matrix-dovetail-camera-plate-long-13in.jpg)
Long Dovetail camera plate for Matrix Sleds, Length : 13 inches (330mm)
compatible with: SmartSystem X1, PRO® GPI® Titan® and Atlas®, FlowCine® XArm®, Steadicam arms with 5/8 arm post ...
ARM POST 5/8IN – STICK OUT 90MM / 3.5IN
ARM POST 5/8IN – STICK OUT 140MM / 5.5IN
ARM POST 3/4IN – STICK OUT 40MM / 1.5IN
ARM POST 3/4IN – STICK OUT 190MM / 7.5IN
J-Bracket with 5/8" arm post designed for GPI® PRO Sled- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ....
V-Lock plate addon kit for SmartSystem monitor, It includes a jumper cable from DTAP to monitor ...
It can be used to power the following products
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Universal Vest Knobs M6 with rounded tips. Stainless steel knobs with round tips to avoid dent on Industry standard mating block.
Monitor rods with clamp designed to fit Matrix sled posts (1.57" / 40mm)The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 2.00" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.75" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Additional bracket for Matrix Sled for a safe and decoupled connection for low mode monitor.Compatible only with M8 d.15 threaded carbon fiber rods.Distance Center-to-Center = 60mmNOTE: no rods are included in this package
With 368grams / 0.82 lbs, made with S31803 Duplex stainless steel, it grants ultimate strength and fatigue durability.
Standard Mating block, in bundle with every ArmX1, industry standard compatible. Made in 7075 Ergal aluminum, shot peened and hard anodized.
U-Bracket designed to be compatible with GPI® PRO Sled gimbalIt let you increase the distance from the arm post and the Sled handle giving to you more headroom to install your preferred monitor on this last one
Vlock plate addon kit for SmartSystem monitors: SM7-3K and SM7-3K-Z
Professional gimbal with dual bearings configuration for every axis
Counterweight plate designed to add mass on the bottom of your Matrix R2 ...
Counterweight plate with 10x counterweights included specifically designed
Counterweight designed to add mass on the bottom of your Matrix Sled if necessary. Every counterweight has a weight of 250gr / 0.5lbs (M4 screw included)Please note that the image is for reference and the color of the counterweight could be different ...
SmartSystem produces professional Stabilizers, X1 Arm, advanced Motion Control for Film Makers and Video Makers, Camera Slider, Camera Dollies ...
