Compatible with all ArmX1 ever manufactured, it can let you mount the J-Bracket or U-Bracket (regular or upside-down) lower than 254mm / 10", respect standard ArmPost.
Arm X1 can lift 32kg ( 70.4 lbs) with an ultimate maximum payload of 34kg (74.9 lbs).
The handle can be directly mounted onto the ArmX1 arm post, providing you with effortless control of the sled. Once mounted in low mode using the ArmX1 Drop Down attachment, maneuvering becomes significantly easier.
Extremely light and compact: it’s one of the smallest and lightest stabilizer arm in the market (only 45mm / 1.77″of width) ...
auf Vorbestellung verfügbar, die ersten Auslieferungen sind für Mai geplant, Auslieferung werden nach Bestelleingang berücksichtigt.
Clearly visible under Sunlight, Equipped with a 7" Ultra Hyper Bright LCD panel with an outstanding brightness of up to 3200 nits and a native resolution of 1920 x 1200 with a contrast ratio of 1200:1
Docking rings for Matrix sled compatible with Matrix Sled Docking Bracket only.
The SM7-PRO-3G also features a new internally developed communication protocol called XTBus that will allow you to connect new products in a dedicated network where they can share information and data.
J-Bracket with 5/8" arm post designed for steadicam® M2 Gimbal- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ...
Dual battery pack for Vlock Batteries with integrated electronics for Matrix Sleds
Versahead is a revolutionary topstage designed for seamless integration with the SmartSystem Matrix sled and other market-leading sleds via a specific adapter.
U-Bracket designed to be compatible with steadicam® M1 gimbalIt let you increase the distance from the arm post and the Sled handle ...
MONITOR MOUNT W/RODS (40MM / 1.575″ POST
Universal camera plate compatible with most sleds on the market. Equipped with safety locking screws.
Compatible arms:
– SmartSystem Arm X1
– PRO® GPI® Titan® and Atlas® Arms
– FlowCine® XArm®
– Tiffen steadicam® arms with 5/8 arm post
– SmartSystem Arm X1
– PRO® GPI® Titan® and Atlas® Arms
– FlowCine® XArm®
– Tiffen steadicam® arms with 5/8 arm post
Universal camera plate compatible with most sleds on the market. Equipped with safety locking screws. Total compatibility with VersaHead ...
it matches perfectly the weight of the standard counterweight with the ability to precisely tuning the position of the outer bell increasing the momentum on the gimbal handle.
The new SmartSystem SmartCAM TEMPO is an SDI splitter featuring a rugged aluminum design. It supports 12G SDI inputs, offers two SDI outputs, and has a built-in OLED screen to display signal information and diagnostic data ...
Monitor rods with clamp designed to fit Matrix sled posts (1.57" / 40mm)The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 2.00" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.5" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
With 368grams / 0.82 lbs, made with S31803 Duplex stainless steel, it grants ultimate strength and fatigue durability.
U-Bracket designed to be compatible with steadicam® M2 gimbalIt let you increase the distance from the arm post and the Sled handle ...
MATRIX DOVETAIL CAMERA PLATE [STANDARD], Length : 6.7inches (170mm)
SmartSystem produces professional Stabilizers, X1 Arm, advanced Motion Control for Film Makers and Video Makers, Camera Slider, Camera Dollies ...
