For Black Arm 3-Axis Stabilizer, Replacement Tilt Arm Dampener, Use for Extra Dampening
The Black Arm Tilt Dampener from FLOWCINE can be used as a replacement component in your Black Arm stabilizer ...
The Black Arm Tilt Dampener from FLOWCINE can be used as a replacement component in your Black Arm stabilizer ...
The GLINK Case is a dual layered, custom foamed Peli AIR 1637 travel case, equipped with wheels and retractable handle bar for lightweight and trouble free packing of the GLINK system.
2 x Spring Cores, 13-24 lb, Orange, Integral Component of GLINK Stabilizer, Polymer Spring with Soft Neoprene Coat..
CF RING FOOT 3 feet - g-Foot-3
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Feet for your CF Ring, to be able to put down your rig without a docking stand.
GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units assembled together servers as the main support ring for connecting to the rest of the GLINK system.
GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units assembled together servers as the main support ring for connecting to the rest of the GLINK system.
GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units assembled together servers as the main support ring for connecting to the rest of the GLINK system.
CF RING FOOT 1 foot - g-Foot-1
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Feet for your CF Ring, to be able to put down your rig without a docking stand.
The Monitor clamp for CF Ring is a quick way to attach a monitor to your gimbal setup.
The GLINK handheld mount is a telescopic mount for either hard mounted cameras and/or electronic heads such as the ARRI Trinity, MK-V Omega/AR or the Betz Wave.
The xARM is based on polymer spring cores with a outer shell of Neoprene. Each spring core has a smooth and linear lifting capacity and when being used near their maximum ...
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″.
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″.
External Rubber Stopper with 2" Rail Clamp for Black Arm Dampening System, Set of 2
300mm Front extension block. For the larger frame gimbals, you may need to extend the Black a little bit.
Tranquilizer O-ring pack shore 20
Black Arm Tranquilizer Shore Pack 20 (12-23 lb)
Black Arm Tranquilizer Shore Pack 20 (12-23 lb)
Black Arm Tranquilizer Shore Pack 30 (14-29 lb)
BLK-TRANQ-ORING-PACK-30
BLK-TRANQ-ORING-PACK-30
Black Arm Tranquilizer Shore Pack 40 (24-49 lb)
BLK-TRANQ-ORING-PACK-40
BLK-TRANQ-ORING-PACK-40
Black Arm Tranquilizer Shore Pack 50 (30-60 lb)
Tranquilizer O-ring pack shore 50
Tranquilizer O-ring pack shore 50
Black Arm Tranquilizer Shore Pack 60 (41-76 lb)
Tranquilizer O-ring pack shore 60
Tranquilizer O-ring pack shore 60
The Pan Barrels are the links that run around the Tranquilizer, dampening the pan axis. Gimbals/remote heads with stronger pan motors needs stiffer Pan Barrels ...
The Pan Barrels are the links that run around the Tranquilizer, dampening the pan axis. Gimbals/remote heads with stronger pan motors needs stiffer Pan Barrels ...
Black Standard to Complete - Blk-Std-to-Cmpl
Dana Dolly Monitor Mount for Dana Dolly (p/n DDMM1). Adjustable monitor mount for small monitors 5lbs and under. Threaded 3/8" stud goes into available hole in Dana Dolly and secures with a wingnut.
