Übersicht

Sortieren nach:

The ezPEG is an attachment for your cart, where you can hang your Easyrig while not wearing it.
€150,00 *
* exkl. MwSt. zzgl. Versandkosten
The ezPEG is an attachment for your cart, where you can hang your Easyrig while not wearing it.
€150,00 *
* exkl. MwSt. zzgl. Versandkosten
The Black T-nut is a clever M12x1.75 nut for tool less or 19mm wrench tightening.
€75,00 *
* exkl. MwSt. zzgl. Versandkosten
The Black T-nut is a clever M12x1.75 nut for tool less or 19mm wrench tightening.
€25,00 *
* exkl. MwSt. zzgl. Versandkosten
The Black Arm Vertical Dampener from FLOWCINE can be used as a replacement component in your Black Arm stabilizer, or for increased dampening when traveling over rough terrain or when supporting a heavier rig.
€175,00 *
* exkl. MwSt. zzgl. Versandkosten
für Easyrig Tragesysteme konzipiert, inklusive 4x Kugel Endstücke (2x 1/4" & 2x 3/8" Gewinde)
€105,00 *
* exkl. MwSt. zzgl. Versandkosten
Protects your Stabil and Stabil G2 arm from dirt and scratches. 
€44,00 *
* exkl. MwSt. zzgl. Versandkosten
Sale
ED-CP198/2000S V-Mount Battery Kit with 2× DUO-C198P Battery & 1× VL-2000S Simultaneous Charger
€1.590,00 UVP €1.395,00 *
* exkl. MwSt. zzgl. Versandkosten
Sale
V-Mount Battery Kit with 1× DUO-C198P Battery & 1× VL-DT1 D-Tap Charger
€560,00 UVP €475,00 *
* exkl. MwSt. zzgl. Versandkosten
Sale
The STABIL-arm can lift camera setups between 5-25 kg / 11-55 lbs. ...
€5.193,00 UVP €4.850,00 *
* exkl. MwSt. zzgl. Versandkosten
The kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.
€425,00 *
* exkl. MwSt. zzgl. Versandkosten
The kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.
€425,00 *
* exkl. MwSt. zzgl. Versandkosten
The kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.
€425,00 *
* exkl. MwSt. zzgl. Versandkosten
Sale
IDX introduces the next generation in the popular DUO-C Series, the DUO-CP Series. This advanced version offers power taps like those found in the DUO Series for powering accessories.
€510,00 UVP €460,00 *
* exkl. MwSt. zzgl. Versandkosten
UC-PD1 (UCPD1) USB-C PD Charger - Compatible with the DUO-CP range of batteries. Please Note: For IDX Charging Times please
€63,00 *
* exkl. MwSt. zzgl. Versandkosten
IDX BH-2 (BH2) ENDURA ELITE Battery Housing Only. PLEASE NOTE: This item is the Housing Only - Cartridges are NOT included.
€345,00 *
* exkl. MwSt. zzgl. Versandkosten
Battery Capacity: 14.4V, 4.6Ah (9.6Ah as one pair), 68Wh*
End Voltage: 12V
€445,00 *
* exkl. MwSt. zzgl. Versandkosten
3 modes of digital data accessing function: IDX mode, SM-Bus mode, and S-type (non-digital) mode ...
€248,00 *
* exkl. MwSt. zzgl. Versandkosten
This Steadicam System is designed based on the needs of Steadicam Operators around the globe.
€765,00 *
* exkl. MwSt. zzgl. Versandkosten
In 2022 the STABIL arm was upgraded even further, it is now known as STABIL G3. Users can now lock the arm without having to use a pin.
€1.683,00 *
* exkl. MwSt. zzgl. Versandkosten
The eMotimo Spectrum ST4.3 is our recently released upgraded version that adds our new expansion port. The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
€4.390,00 *
* exkl. MwSt. zzgl. Versandkosten
Spectrum ST4 Run & Gun Bundle 14:1 Motor - ST417_RG_GM_14
€3.940,00 *
* exkl. MwSt. zzgl. Versandkosten
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig. Direct Drive Motor ...
€4.440,00 *
* exkl. MwSt. zzgl. Versandkosten
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig. Direct Drive Motor ...
€4.350,00 *
* exkl. MwSt. zzgl. Versandkosten
* exkl. MwSt. zzgl. Versandkosten
Wir benutzen Cookies nur für interne Zwecke um den Webshop zu verbessern. Ist das in Ordnung? Ja Nein Für weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x