Extension Monitor/Battery Rods Ideal for mounting accessories under the stage, such as Monitors for low mode, or MDR systems.
Steadicam padded dock allows for docking your sled around the gimbal handle, securely fixing with a lockable lever grip.
Padded dock allows for docking your sled around the gimbal handle, securely fixing with a lockable lever grip.
14.4V 96Wh BPU mount Rechargeable Lithium Ion Battery with 1 x D-Tap + USB PD (In and Out) ...
The xSPINE Cinema 2.5 / 3 mount allows an operator to quickly connect a Easyrig support bar to the back of the xSPINE using tool-less locks for quick mounting / dismounting.
77mm Water White Glass NATural IRND 1.2 Filter is a neutral density filter with a 16x filter factor that provides a 4-stop exposure reduction.
CL-UC1, Olympus connector supports:
CL-UC1, Olympus connector supports Olympus: E520 E510 E420 E410 E300,SP-570 UZ,SP-560 UZ,SP-550UZ,SP-510 UZ.
CL-UC1, Olympus connector supports Olympus: E520 E510 E420 E410 E300,SP-570 UZ,SP-560 UZ,SP-550UZ,SP-510 UZ.
Sale
3 GimbalRig 500N (large) with Easyrig STABIL G3 - EASY-G353ST
Sale
3 GimbalRig 750N (standard) with extended arm +230mm/9in - EASY-G373B
Sale
Easyrig 3 GimbalRig 750N (standard) with Easyrig STABIL G3, 750N model for cameras between 15-20 kg. Gas Shock Absorber: The Cinema 3 is delivered with a shock absorber to fit your exact camera weight, ranging from 200N (3 kg) up to 1200N (32 kg) in steps
The ezPEG is an attachment for your cart, where you can hang your Easyrig while not wearing it.
für Easyrig Tragesysteme konzipiert, inklusive 4x Kugel Endstücke (2x 1/4" & 2x 3/8" Gewinde)
IDX BH-2 (BH2) ENDURA ELITE Battery Housing Only. PLEASE NOTE: This item is the Housing Only - Cartridges are NOT included.
Battery Capacity: 14.4V, 4.6Ah (9.6Ah as one pair), 68Wh*
End Voltage: 12V
End Voltage: 12V
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig. Direct Drive Motor ...
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig. Direct Drive Motor ...
This is a custom cable that runs from the Spectrum ST4's i/o port to the Nodo Inertia Wheels Receiver (RX).
Movement: ST4 - 4 axis motion controller - Pan/Tilt/Focus and Slide on Dana Dolly
ST4.3 - 7 axis motion controller - Pan/Tilt/M3/M4 ports with up to 3 Tilta Nucleus M Motors.
ST4.3 - 7 axis motion controller - Pan/Tilt/M3/M4 ports with up to 3 Tilta Nucleus M Motors.
This is a 6 foot DC extension cable: 2.1mm male/female, straight plugs, black, 18AWG. This extension cable is used to add additional length between your battery and your TB3 or to extend your ST4 AC/DC adapter.
The Serene Bungee grip is a small hook that holds the bungee cord in place.
It’s placed on ONE side of the Serene arm, where the bungee cord is attached. This holds it in place, so you never lose your bungee cord ever again!
It’s placed on ONE side of the Serene arm, where the bungee cord is attached. This holds it in place, so you never lose your bungee cord ever again!
52 to 64 lb Load Capacity Range, Change Core for Different Weight Setup, Pre-Extended for Quick Change ...
37 to 49.5 lb Load Capacity Range, Change Core for Different Weight Setup, Pre-Extended for Quick Change ...
17.5 to 31 lb Load Capacity Range - Change Core for Different Weight Setup - Pre-Extended for Quick Change ...
