In The Box:
2x Imicro-50P V-Mount Li-Ionen Akku (49 Wh, 3.3 Ah, 14.5 V)
1x VL-2X 2-Kanal V-Mount Ladegerät
2x Imicro-50P V-Mount Li-Ionen Akku (49 Wh, 3.3 Ah, 14.5 V)
1x VL-2X 2-Kanal V-Mount Ladegerät
Lithium-Ionen Akku mit 72 Wh, 9.9 Ah, 7.2 V, USB-A- und USB-C PD Anschluss, sowie LED Statusanzeige für Kameras der Sony L Serie ...
M2-VK (M2VK) M2 Volt Upgrade Kit (No Padded Dock) steadicam-m2-vk-m2-volt-upgrade-kit / M2-VK
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
ACE II bag, for rigs with GimbalRig vest up to +130mm (5") & STABIL G3 arm, bottom length: 67 cm
GPIPRO MINI DOCKING BRACKET WITH 3/4", 5/8", 1/2" PINS
M-SERIES MINI DOCKING BRACKET WITH 3/4", 5/8", 1/2" PINS
REAR WAIST - Part Nr. 815-7818
Universal Vest Knobs M6 with rounded tips. Stainless steel knobs with round tips to avoid dent on Industry standard mating block.
Allows the operator to fine-tune the fore and aft position of the dovetail when balancing the gimbal on the GLINK CF Ring.
The Tiffen 49mm Smoque 3 Filter is a unique diffusion filter that provides a smoky, hazy quality to your images, emulating the effects of a smoke or fog machine.
Monitor rods with clamp designed to fit Matrix sled posts (1.57" / 40mm)The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 2.00" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.5" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
With this kit, it is possible to transform the standard ArmX1 Arm Post into a free-spinning friction-less Arm Post ...
Replacement Ratchet Straps suitable for: Ultra - LX - Zephyr and Master Vest. Vest Ratchet Strap - MSC-079901
Shooters wishing to add Z-axis isolation to their motorized three-axis gimbal setup can wear the medium GLINK Vest and Arm Stabilization System from Flowcine.
Handgriffschiene für Sealux Housings ...
Replacement Ratchet Straps suitable for: Ultra - LX - Zephyr and Master Vest. Vest Ratchet Strap - MSC-079901
Camera operators who would like to attach a stabilization arm to their xSPINE vest can do so via this xBONE CF Back Mount from FLOWCINE, which extends a standard universal socket block to the shooter's left or right
The Tiffen 67mm Digital Diffusion/FX 2 Filter is a softening and diffusion filter specifically meant to appear invisible, as if no filtration is being applied.
Lightweight & comfortable design, adjustable - one size fits all, Large socket block
Extension Monitor/Battery Rods Ideal for mounting accessories under the stage, such as Monitors for low mode, or MDR systems.
Steadicam padded dock allows for docking your sled around the gimbal handle, securely fixing with a lockable lever grip.
