Compatible arms:
– SmartSystem Arm X1
– PRO® GPI® Titan® and Atlas® Arms
– FlowCine® XArm®
– Tiffen steadicam® arms with 5/8 arm post
– SmartSystem Arm X1
– PRO® GPI® Titan® and Atlas® Arms
– FlowCine® XArm®
– Tiffen steadicam® arms with 5/8 arm post
U-Bracket designed to be compatible with ARRI® Artemis2/Trinity2. It let you increase the distance from the arm post and the Sled handle giving to you more headroom to install your preferred monitor on this last one.
Extendable Length : 26.3cm (10.35"), Closed Length : 54cm (21.26"), Weight: 2 kg (4.4lbs) ...
3Studs plate addon kit for SmartSystem monitor. It includes a jumper cable from DTAP to monitor.
Maximize motion control, Underneath the hood of the Conductor Sa2.6 is a first of its kind array of processors that can seamlessly control pan/tilt/roll/focus/zoom/monorail, all at the same time.
Maximize motion control, Underneath the hood of the Conductor Sa2.6 is a first of its kind array of processors that can seamlessly control pan/tilt/roll/focus/zoom/monorail, all at the same time.
Already own a Conductor SA2.6 and a RigWheels Monorail? The Monorail Conductor Integration Kit includes what you need to motorize your Monorail system.
V-Mount Lithium-Ionen Akku mit 143 Wh, 13.9 Ah, 16.8 V, D-Tap Ausgang (80 Wh), 4-stufige LED-Anzeige ...
Shadow Mini Docking Bracket with 3/4", 5/8" & 1/2" Pins
The XTDongle enables seamless connectivity between PCs or Macs and any XTBus-compliant device, allowing you to fully utilize the new port capabilities.
Sale
compatible with: SmartSystem X1, PRO® GPI® Titan® and Atlas®, FlowCine® XArm®, Steadicam arms with 5/8 arm post ...
Sale
J-Bracket with 5/8" arm post designed for GPI® PRO Sled- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ....
V-Lock plate addon kit for SmartSystem monitor, It includes a jumper cable from DTAP to monitor ...
specifically designed for SM7 PRO 3G, it is possible to mount it on brackets that require central attachment under the monitor.
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
The Steadicam Logo T-shirt, XXL (Black) is a 6.1 oz ultra-heavyweight cotton ...
This bag incorporates an integrated Trolley System, effectively alleviating the need for users to manually lift their Easyrig while going to the filming location.
ROYAL Bag for rigs with Cinema and GimbalRig vest up to +130mm (5") & STABIL G3 (not for + 230mm)
Sale
Complete Boom support bar with power box, hook, knobs and washers
It can be used to power the following products
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
If you have a compatible DJI Gimbal (RS2 and RS3) and want an all inclusive setup, this kit adds eMotimo's iFootage Shark Slider + Integration kit with our direct drive motor.
Universal Vest Knobs M6 with rounded tips. Stainless steel knobs with round tips to avoid dent on Industry standard mating block.
Sale
The Z-Finder Pro 2.5x for 3.2” screens is an optical viewfinder that allows DSLR cameras to have the correct form factor for video.
