Additional bracket for Matrix Sled for a safe and decoupled connection for low mode monitor.Compatible only with M8 d.15 threaded carbon fiber rods.Distance Center-to-Center = 60mmNOTE: no rods are included in this package
The xARM is a double section articulated stabilization arm, made from aircraft grade aluminium, solid carbon fibre infused titanium shafts and large stainless steel precision ball bearings
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum.
100Watt 2-Kanal USB-C PD Lade-Gerät, aufladen der IDX-Akkus mit einem USB-PD-Anschluss
Battery Capacity: 14.4V, 4.6Ah (9.6Ah as one pair), 68Wh*
End Voltage: 12V
End Voltage: 12V
3 modes of digital data accessing function: IDX mode, SM-Bus mode, and S-type (non-digital) mode ...
44.5 to 56 lb Load Capacity Range, Change Core for Different Weight Setup, Pre-Extended for Quick Change ...
37 to 49.5 lb Load Capacity Range, Change Core for Different Weight Setup, Pre-Extended for Quick Change ...
For Black Arm 3-Axis Stabilizer, Replacement Tilt Arm Dampener, Use for Extra Dampening
The Black Arm Tilt Dampener from FLOWCINE can be used as a replacement component in your Black Arm stabilizer ...
The Black Arm Tilt Dampener from FLOWCINE can be used as a replacement component in your Black Arm stabilizer ...
The GLINK Docking Station allows the operator to easily store all necessary GLINK parts in one place while working on set.
GLINK Spring Cores ( 18.0 - 24.9 KG, blau ) - g-Spring-Blue *
GLINK Spring Cores ( Grey: 12.5-18.5 KG – 27.5-40.5 LBS )
2 x Spring Cores, 13-24 lb, Orange, Integral Component of GLINK Stabilizer, Polymer Spring with Soft Neoprene Coat..
Holds GLINK Upright without Stand, 1/4"-20 and 3/8"-16 Female Threads, Clamps to Bottom CF Ring, Designed for GLINK Stabilization System ...
Use the GLINK MoVI R2 Mount to quickly and securely attach your Freefly MoVI or DJI Ronin 2 to your GLINK setup.
Replacement camera mounting pin for camera mounting plate assembly (601-7412 and 802-7417). The pin screw is compatible with Clipper 2, Clipper, Vector and Archer_2S.
Sale
Ersatzteil - Oberer STABIL Light Arm zur Nachrüstung für Minimax Trage-Systeme ab Seriennummer MM8179
The new hybrid back mount, giving you greater boom range and more stabilization!
The new hybrid back mount, giving you greater boom range and more stabilization!
The new hybrid back mount, giving you greater boom range and more stabilization!
The xARM Waterproof cover, is our thinnest and softest cover for the xARM. Its inner fleece material keeps the xARM intact from anything that might rub against it.
These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals.
The xPEG Babypin is a hook that you can attach wherever there is a baby pin, where you can hang your Steadicam arm.
The Winter softshell cover is a neoprene cover that keeps your xARM performing at its best at sub-zero temperature ....
