Holds GLINK Upright without Stand, 1/4"-20 and 3/8"-16 Female Threads, Clamps to Bottom CF Ring, Designed for GLINK Stabilization System ...
GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units assembled together servers as the main support ring for connecting to the rest of the GLINK system.
GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units assembled together servers as the main support ring for connecting to the rest of the GLINK system.
CF RING FOOT 1 foot - g-Foot-1
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Feet for your CF Ring, to be able to put down your rig without a docking stand.
The Monitor clamp for CF Ring is a quick way to attach a monitor to your gimbal setup.
The GLINK handheld mount is a telescopic mount for either hard mounted cameras and/or electronic heads such as the ARRI Trinity, MK-V Omega/AR or the Betz Wave.
The Black Pro Clamp Dual links together 48-51mm tubes to build your desired rig. Maximum 500KG load weight. All Pro Clamps are german TUV certified.
The Flowcine 150mm Clamp is specially designed for Black Arm Dampening System.
xSPINE vest + Front mount ...
The xPEG is a hook that you mount on your cart, where you can hang your Steadicam arm.
These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals.
These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals.
The xPEG Babypin is a hook that you can attach wherever there is a baby pin, where you can hang your Steadicam arm.
This is a Canon LP-E6 Battery Mount from Steadicam designed to attach to the Steadicam AERO 15 or AERO 30 Stabilizer and support Canon LP-E6 batteries to power the stabilizer.
Flowcine ClampSingle (Blk-ClampSingle) Black Pro Clamp Single for Universal Rack.
Compatible with all ArmX1 ever manufactured, it can let you mount the J-Bracket or U-Bracket (regular or upside-down) lower than 254mm / 10", respect standard ArmPost.
The 45mm Extension rods attaches to the standard rods on your Tranquilizer/Wire AVM, giving some extra space above or below the vibration mount.
12V Camera Power Cable for Clipper 312/324 (078-7351-01)...
Rough ground, gravel and electrical cords are a worry of the past.
This is just the Dana Dolly. Made in the USA. T-6061 Aluminum, Black.
Item: DanaDolly
Item: DanaDolly
150mm arca compatible plate works with arca clamps. Mount this plate to the bottom of your camera or slider ...
IFOOTAGE EXTENSION TUBE KIT - ST4MAC_IF6
The eMotimo 100mm arca compatible plate works with arca clamps ...
MICRO USB TO USB CHARGING CABLE FOR PS4 DUALSHOCK CONTROLLER
