The kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.
The kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.
IDX BH-2 (BH2) ENDURA ELITE Battery Housing Only. PLEASE NOTE: This item is the Housing Only - Cartridges are NOT included.
Battery Capacity: 14.4V, 4.6Ah (9.6Ah as one pair), 68Wh*
End Voltage: 12V
End Voltage: 12V
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
Movement: ST4 - 4 axis motion controller - Pan/Tilt/Focus and Slide on Dana Dolly
ST4.3 - 7 axis motion controller - Pan/Tilt/M3/M4 ports with up to 3 Tilta Nucleus M Motors.
ST4.3 - 7 axis motion controller - Pan/Tilt/M3/M4 ports with up to 3 Tilta Nucleus M Motors.
This is a 6 foot DC extension cable: 2.1mm male/female, straight plugs, black, 18AWG. This extension cable is used to add additional length between your battery and your TB3 or to extend your ST4 AC/DC adapter.
The xR3ACH Waterproof cover, is our thinnest and softest cover for the xR3ACH back mount. Its inner fleece material keeps the back mount protected from anything that might rub or scratch against it.
The Winter softshell cover is a neoprene cover that keeps your xR3ACH performing at its best at sub-zero temperature (0C/32F down to -20C/-4F).
The Serene Bungee grip is a small hook that holds the bungee cord in place.
It’s placed on ONE side of the Serene arm, where the bungee cord is attached. This holds it in place, so you never lose your bungee cord ever again!
It’s placed on ONE side of the Serene arm, where the bungee cord is attached. This holds it in place, so you never lose your bungee cord ever again!
52 to 64 lb Load Capacity Range, Change Core for Different Weight Setup, Pre-Extended for Quick Change ...
44.5 to 56 lb Load Capacity Range, Change Core for Different Weight Setup, Pre-Extended for Quick Change ...
The xARM is a double section articulated stabilization arm, made from aircraft grade aluminium, solid carbon fibre infused titanium shafts and large stainless steel precision ball bearings
The Universal Rack clamps on to the tow bar of your car. It allows two Pro Clamp singles to be attached for further mounting of standard 48-51mm tubes. The Universal Rack is very easy to attach, and mounts on to any standard 50mm tow bar.
GLINK Spring Cores ( 18.0 - 24.9 KG, blau ) - g-Spring-Blue *
2 x Spring Cores, 22-34 lb, Black, Integral Component of GLINK Stabilizer ...
Holds GLINK Upright without Stand, 1/4"-20 and 3/8"-16 Female Threads, Clamps to Bottom CF Ring, Designed for GLINK Stabilization System ...
GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units assembled together servers as the main support ring for connecting to the rest of the GLINK system.
The Monitor clamp for CF Ring is a quick way to attach a monitor to your gimbal setup.
The GLINK handheld mount is a telescopic mount for either hard mounted cameras and/or electronic heads such as the ARRI Trinity, MK-V Omega/AR or the Betz Wave.
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″.
The xDROP, is a new male socket block-to-female socket block connection bracket, that drops the arm connection to the vest approx 85mm or 3.4″ and offsets the same connection to the side 55mm or 2.2″.
The xSOCKET, is a universal female socket block that works on all universal Steadicam type vests, such as Tiffen(R) Exovest, GPI PRO(™) vests and all universal socket block Steadicam type arms.
The xPEG is a hook that you mount on your cart, where you can hang your Steadicam arm.
The xPEG Rip-Tie allows the operator to tighten up the arm at the bottom shelf of the cart.
The xPEG Rip-Tie allows the operator to tighten up the arm at the bottom shelf of the cart.
