The xSPINE vest is the world’s first universal vest made for all kinds of camera operators in mind, made for versatility and moveability. The xSPINE can currently be used for Steadicam™ operation both as front and back mount in various configurations.
Geared motor mount, Motor & Pully for Dana Dolly ...
Short Dovetail plate for Steadicam M-1. With machined recesses for the M1 feet. Useful slots for 1/4-20 and 3/8" camera screws. Designed for the M1 slim 3rd battery mount, ...
14.4V 96Wh BPU mount Rechargeable Lithium Ion Battery with 1 x D-Tap + USB PD (In and Out) ...
The Super-high/low mode link bracket, joins two arm posts with a lockable link, allowing the long and regular arm posts to be used both in high mode and low mode.
CL-CB1, Olympus connector supports: Olympus: E1,E3,E10,E20,E30.
Alpha a9, a7, a7 II, a7 III, a7R, a7R II, a7R III, a7S, a7S II, a6500, a6400, a6300, a6000, a5100, a5000, a3000, a77 II, a58
Cyber-shot RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VI, RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II ...
Cyber-shot RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VI, RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II ...
This cable connects a WeMacro Rail Motor (not included) to an external motor port on your ST4/ST4.3. This cable is 4.9 feet in length.
Sale
3 Gimbalrig 600N (Standard) With Easyrig STABIL G3, the 600N arm is designed to take weights between 13-15 kg ...
Sale
3 GimbalRig 500N (large) with Easyrig STABIL G3 - EASY-G353ST
Sale
3 GimbalRig 750N (standard) with extended arm +230mm/9in - EASY-G373B
The ezPEG is an attachment for your cart, where you can hang your Easyrig while not wearing it.
Battery Capacity: 14.4V, 4.6Ah (9.6Ah as one pair), 68Wh*
End Voltage: 12V
End Voltage: 12V
Spectrum ST4 Run & Gun Bundle 14:1 Motor - ST417_RG_GM_14
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig. Direct Drive Motor ...
This is a custom cable that runs from the Spectrum ST4's i/o port to the Nodo Inertia Wheels Receiver (RX).
Movement: ST4 - 4 axis motion controller - Pan/Tilt/Focus and Slide on Dana Dolly
ST4.3 - 7 axis motion controller - Pan/Tilt/M3/M4 ports with up to 3 Tilta Nucleus M Motors.
ST4.3 - 7 axis motion controller - Pan/Tilt/M3/M4 ports with up to 3 Tilta Nucleus M Motors.
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″.
The Rigid nose mount is an accessory for the times where you need to lock up the roll/tilt movement for the Black arms head. Common use cases could be when the Black is mounted on to a motorcycle ...
Black Arm Tranquilizer Shore Pack 40 (24-49 lb)
BLK-TRANQ-ORING-PACK-40
BLK-TRANQ-ORING-PACK-40
Black Arm Tranquilizer Shore Pack 60 (41-76 lb)
Tranquilizer O-ring pack shore 60
Tranquilizer O-ring pack shore 60
The Pan Barrels are the links that run around the Tranquilizer, dampening the pan axis. Gimbals/remote heads with stronger pan motors needs stiffer Pan Barrels ...
The Black Mitchell Nut is a Mitchell castle nut that is more narrow than most castle nuts, making it fit through the rods of our Female Mitchell mount.
4 x DUO-C150P Batteries, 1 x VL-4Se Charger - ED-CP150/4Se
