Allows the operator to fine-tune the fore and aft position of the dovetail when balancing the gimbal on the GLINK CF Ring.
The official Steadicam Baseball Cap ...
Exovest Replacement Straps 815-7888
801-7291 is a kit for adaptation to an arm and vest upgrade ...
Erzeugt leuchtende Highlights, Mildert Falten und Flecken, Glitzerndes Aussehen für mehr Vertrauen, ColorCore®-Technologie ...
Compact version of Ultra vest, complete with socket block, cross back straps, emergency quick release. Fits thinner and also shorter operators, 4"10" to 5"9".
The Steadicam X3 expands an operator’s ability to put the camera anywhere the shot requires with maximum comfort and mobility
This filter is ideal for use in situations where smoke could typically be encountered, but is not available or present. The 1 density provides less smoke effect than the 2.
Produces a Smoky, Hazy Effect, Eliminates the Need for Artificial Smoke, ColorCore Technology ...
All new, re-designed pulley wheel for the Steadicam Volt enabled gimbal. Reinforced and lower profile side walls.
All new, re-designed pulley wheel for the Steadicam Volt enabled gimbal. Reinforced and lower profile side walls.
Suitable for all Volt versions. M-Series, Volt-1.5 Gimbal . Shadow, Archer2, GPI Pro,
Betz Rig
Betz Rig
Monitor rods with clamp designed to fit Matrix sled posts (1.57" / 40mm)The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 2.00" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.75" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
3Studs Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY
Additional bracket for Matrix Sled for a safe and decoupled connection for low mode monitor.Compatible only with M8 d.15 threaded carbon fiber rods.Distance Center-to-Center = 60mmNOTE: no rods are included in this package
With this kit, it is possible to transform the standard ArmX1 Arm Post into a free-spinning friction-less Arm Post ...
With 368grams / 0.82 lbs, made with S31803 Duplex stainless steel, it grants ultimate strength and fatigue durability.
Standard Mating block, in bundle with every ArmX1, industry standard compatible. Made in 7075 Ergal aluminum, shot peened and hard anodized.
comes with: 15mm carbon fiber rods with embedded battery joint, Locking knob, Nylon washer
Hirose10 to Hirose4 - CineMonitorIII to Steadicam
Replacement Ratchet Straps suitable for: Ultra - LX - Zephyr and Master Vest. Vest Ratchet Strap - MSC-079901
The GLINK 1.5 is a new type of gimbal body support system that is made to work with electronic gimbals such as the Freefly systems M10, M15, MoVI Pro and the DJI Ronin 2
