The ezPEG Babypin is an attachment for any babypin connector, where you can hang your Easyrig while not wearing it.
the ezPEG allows the camera operator to easily attach your Easyrig Minimax to any vertical ⅝” baby pin.
The ezPEG is an attachment for your cart, where you can hang your Easyrig while not wearing it.
The Serene Tough bands are for everyone that shoots on a very heavy setup.
Maximize your reach by adding the Extension Arm.The Serene Extension arm is an additional arm that the user can quickly and easily mount on their current Serene to extend the length of the arm.
The patent pending 2-axis Puppeteer is an anti-vibration mount made to eliminate the motion coming from the Easyrig cord while walking or running.
The Serene and Extension arm is a kit with the following equipment: Serene and Serene Extension arm
These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals.
These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals.
The xPEG Babypin is a hook that you can attach wherever there is a baby pin, where you can hang your Steadicam arm.
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig. Direct Drive Motor ...
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
The Steadicam Zephyr Power Cable for Red Epic & Scarlet provides power from your Steadicam Zephyr or Archer camera stabilizer to your attached camera. The cable weighs about 1.6 oz and is 15" long.
This is a Panasonic D28 Battery Mount from Steadicam designed to attach to the Steadicam AERO 15 or AERO 30 Stabilizer and support Panasonic D28 batteries to power the stabilizer.
15mm Low Mode Bracket for Transvideo - 815-7526
J-Bracket with 5/8" arm post designed for GPI® PRO Sled- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ....
U-Bracket designed to be compatible with steadicam® M2 gimbalIt let you increase the distance from the arm post and the Sled handle ...
U-Bracket designed to be compatible with steadicam® M1 gimbalIt let you increase the distance from the arm post and the Sled handle ...
U-Bracket designed to be compatible with GPI® PRO Sled gimbalIt let you increase the distance from the arm post and the Sled handle giving to you more headroom to install your preferred monitor on this last one
Arm Post - Size: 12" to 1/2" Top - 800-7204-05
QUICK RELEASE HOOK - Pup-QuickRelease
Puppeteer for Helix from FLOWCINE is an accessory designed for using a Letus Helix motorized gimbal stabilizer ...
Upper and Lower Black Arm Frame Components - Blk-Bone
Tranquilizer Xl For Use With Black Arm Dual - BLK-TRANQ-XL
