Already own a Conductor SA2.6 and a RigWheels Monorail? The Monorail Conductor Integration Kit includes what you need to motorize your Monorail system.
Monorail carriage, 2 pipe clamps, 20' of Portarail with soft case and 3 inline hangers.
Shadow Mini Docking Bracket with 3/4", 5/8" & 1/2" Pins
For 2nd Dock/Cart/Moses Pole. Gives a compact solution for an end-point dock, or super compact where a standard docking bracket may be excessive.
Imicro hot swap plate with 2 x D-Tap, 1 x 45W USB-C PD Outputs. Can be used on IDX V-Lock charger for sequential charging.
J-Bracket with 5/8" arm post designed for GPI® PRO Sled- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ....
Compatible with all ArmX1 ever manufactured, it can let you mount the J-Bracket or U-Bracket (regular or upside-down) lower than 254mm / 10", respect standard ArmPost.
Lithium-Ionen Akku mit 72 Wh, 9.9 Ah, 7.2 V, USB-A- und USB-C PD Anschluss, sowie LED Statusanzeige für Kameras der Sony L Serie ...
specifically designed for SM7 PRO 3G, it is possible to mount it on brackets that require central attachment under the monitor.
The Black arm rigging bundle is a kit of products that will help you quickly and easily rig the included Black arm to a vehicle. The bundle includes a Stub mount, made to quickly create a fixed mounting point in the front of a car, the Universal rack ...
V-Mount Lithium-Ionen Akku mit 143 Wh, 13.9 Ah, 16.8 V, D-Tap Ausgang (80 Wh), 4-stufige LED-Anzeige ...
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
Mini Lemo5 male to Lemo6 male right angle cable. To Power the StarliteHD5-ARRI on ARRI Amira/Mini. For StarliteHD5-ARRI only ...
der STABIL Light Arm kann auch auf neue Minimaxe ab Seriennummer MM8179 ...
This bag incorporates an integrated Trolley System, effectively alleviating the need for users to manually lift their Easyrig while going to the filming location.
ACE II bag, for rigs with GimbalRig vest up to +130mm (5") & STABIL G3 arm, bottom length: 67 cm
ROYAL Bag for rigs with Cinema and GimbalRig vest up to +130mm (5") & STABIL G3 (not for + 230mm)
Mini V-Mount 49 Wh Akku, V-Mount micro Akku mit 49Wh, belastbar bis 7,2 A Dauerstrom, Gewicht 420g ...
14.5V 145Wh* 14A High Load micro V-mount with Digital Data, V-Torch, 1 x USB-PD.+ 1 x D-Tap O/P ...
CF Spart Mount Plate ...
This is a DTAP to 2.1mm x 5.5mm barrel connector - center positive. The barrel connector is locking with a screw.
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum ST4/ST4.3 or the M1/M2 motor ports of the Conductor SA2.6
Docking rings for Matrix sled compatible with Matrix Sled Docking Bracket only.
