44" RA-0B.308 Volt Motor Cable
Shadow Mini Docking Bracket with 3/4", 5/8" & 1/2" Pins
It minimize the oscillation of Zen due to improper installation granting a more stable behavior especially on low mode.
ASSY-Tilt Wheel Socket Block
Lithium-Ionen Akku mit 72 Wh, 9.9 Ah, 7.2 V, USB-A- und USB-C PD Anschluss, sowie LED Statusanzeige für Kameras der Sony L Serie ...
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
The bag is made to store or carry one slider stand on location with ease (Optional).
GPIPRO MINI DOCKING BRACKET WITH 3/4", 5/8", 1/2" PINS
CF Spart Mount Plate ...
Slider Stativ mit maximaler Traglast von 20 kg. Länge zwischen 61 - 131 cm, Farbe schwarz
The Baby Ball Head Adapter. Constructed as one-piece out of 6061 T-6 Aluminium, this strong, sleek-looking adapter converts any 5/8" baby pin or 1-1/8" junior receiver into a 3/8-16" threaded spud.
If you have a compatible DJI Gimbal (RS2 and RS3) and want an all inclusive setup, this kit adds eMotimo's iFootage Shark Slider + Integration kit with our direct drive motor.
The eMotimo Spectrum ST4 is a motion control pan and tilt head. The Spectrum is an advanced 4-axis motion controller for cinematography and photography that is faster, more accurate, and easier to use than anything else on the market.
Maximum Height: 101cm (39.8"), Weight: 4.5kg (10lbs), 2 Risers, 3 Sections, Leveling Leg ...
eMotimo spectrum ST4 Run & Gun Bundle, smallest and lightest 4-axis bundle ...
801-7291 is a kit for adaptation to an arm and vest upgrade ...
Glimmerglass is a line of diffusion filters that produces a soft clean halation around practical and specular light sources ...
Glimmerglass is a line of diffusion filters that produces a soft clean halation around practical and specular light sources ...
Already own a Spectrum ST4 and a Dana Dolly? The eMotimo Dana Dolly Integration Kit includes almost everything you need to motorize your Dana Dolly for your Spectrum. To motorize your kit, simply mount up the motor, belt clamps, belt, and your Spectrum.
Creates Glowing Highlights, Softens Wrinkles and Blemishes, Sparkle Appearance for Added Confidence, ColorCore® Technology, Made in the U.S.A. ... 39MM GLIMMERGLASS 1/8
CT-20M (CT20M) 20 Inch C-Stand With Turtle Base kupo_ct-20m / KUP-CT-20M
Monitor rods with clamp designed to fit 2.00" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.5" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.37" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
