Übersicht

Sortieren nach:

Already own a Spectrum ST4/ST4.3 or Conductor SA2.6 and a Dana Dolly? The eMotimo Dana Dolly Integration Kits includes almost everything you need to motorize your Dana Dolly for your Spectrum.
€545,00 *
* exkl. MwSt. zzgl. Versandkosten
Gear ratio: 14:1 for Shark S1 Integration Kit - ST4MAC_SIK-DD, 14:1: Strong enough for video and timelapse - moves up most slopes.
€145,00 *
* exkl. MwSt. zzgl. Versandkosten
Sale
M2-VLKIT (M2VLKIT) 2 Core Kit - V-Lock Base. Includes 1x M2 Flat Stage, 1x 1.58 Post, 1x Monitor Bracket, V-Lock Base, 1x Docking Bracket, 1x G-50X Arm and 1x Zephyr Vest (No Substitutions) ...
€27.400,00 UVP €24.900,00 (€27.400,00 / ) *
* exkl. MwSt. zzgl. Versandkosten
Multi-core CPU 6 sensors multi-axis digital level indicator, Powered via USB or pushpull connector with daisy chain possibility, Case milled from solid aluminum, shot-peened and hard anodized ..
€1.040,00 *
* exkl. MwSt. zzgl. Versandkosten
Fits on any 28mm lightstand. The bottom side is provided with a 16mm pin adapter hole. Note: Only this spigot can be used for the Tango System. Other spigots will cause damage to your Tango slider system.
€28,00 *
* exkl. MwSt. zzgl. Versandkosten
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum ST4/ST4.3 or the M1/M2 motor ports of the Conductor SA2.6
€128,00 *
* exkl. MwSt. zzgl. Versandkosten
Die Arbeitshöhe von 58 cm bis 115 cm bietet auch einen perfekten Höhenbereich für Dolly-Arbeiten. Es ist mit zwei trägen Beinen ausgestattet, um das Nivellieren auf unebenem Gelände wie Hügeln, Berghängen, felsigen Umgebungen und Treppen zu erleichtern ..
€255,00 (€341,00 / ) *
* exkl. MwSt. zzgl. Versandkosten
A memory collar is included so you can quickly return to a previous height adjustment. A junior 1-1/8" receiver is welded to the top riser section to give you mounting flexibility.
€275,00 *
* exkl. MwSt. zzgl. Versandkosten
Creates Glowing Highlights, Softens Wrinkles and Blemishes, Sparkle Appearance for Added Confidence, ColorCore® Technology, Made in the U.S.A. ... 39MM GLIMMERGLASS 1/8
€95,00 *
* exkl. MwSt. zzgl. Versandkosten
Allows the operator to fine-tune the fore and aft position of the dovetail when balancing the gimbal on the GLINK CF Ring.
€65,00 *
* exkl. MwSt. zzgl. Versandkosten
Erzeugt leuchtende Highlights, Mildert Falten und Flecken, Glitzerndes Aussehen für mehr Vertrauen, ColorCore®-Technologie ...
€135,00 *
* exkl. MwSt. zzgl. Versandkosten
Already own a Spectrum ST4 and a Dana Dolly? The eMotimo Dana Dolly Integration Kit includes almost everything you need to motorize your Dana Dolly for your Spectrum. To motorize your kit, simply mount up the motor, belt clamps, belt, and your Spectrum.
€725,00 *
* exkl. MwSt. zzgl. Versandkosten
Compact version of Ultra vest, complete with socket block, cross back straps, emergency quick release. Fits thinner and also shorter operators, 4"10" to 5"9".
€5.790,00 (€6.390,00 / ) *
* exkl. MwSt. zzgl. Versandkosten
Standard Mating block, in bundle with every ArmX1, industry standard compatible. Made in 7075 Ergal aluminum, shot peened and hard anodized.
€375,00 *
* exkl. MwSt. zzgl. Versandkosten
Der SA2.6 ist ein leistungsstarker Motion Controller für Videofilmer und Filmemacher. Wenn Sie bereits einen DJI RS2 oder RS3 Gimbal besitzen, können Sie diesen nun einfach mit Linearbewegungen und Drehtischen kombinieren ...
€1.375,00 *
* exkl. MwSt. zzgl. Versandkosten
GLINK ein neuartiges Gimbalsystem, nutzbar für elektronische Gimbals wie das Freefly M10, M15, MoVI Pro und auch DJI Ronin 2 System.
€4.745,00 *
* exkl. MwSt. zzgl. Versandkosten
Shooters wishing to add Z-axis isolation to their motorized three-axis gimbal setup can wear the medium GLINK Vest and Arm Stabilization System from Flowcine.
€9.930,00 *
* exkl. MwSt. zzgl. Versandkosten
The xSPINE case is based on a Peli AIR 1605 case with custom foam laid out so you can fold the xSPINE to take up minimal space, while having room over for both the xBONE CF back mount and the xSPINE Front mount.
€474,00 *
* exkl. MwSt. zzgl. Versandkosten
Sale
xSPINE + xBONE CF + Front mount + xARM - FC-X-xSPINE-xBCF-Frnt-xARM
€15.255,00 UVP €14.850,00 *
* exkl. MwSt. zzgl. Versandkosten
xARM Double-Section Articulated Stabilization Arm. Add a heavy-duty stabilization arm to your vest and gimbal rig with the xARM Double-Section Articulated Stabilization Arm from FLOWCINE to achieve smooth, professional motion shots.
€17.425,00 *
* exkl. MwSt. zzgl. Versandkosten
Capture professional, smooth camera movements by flying your rig with the xSPINE Vest, xBONE CF, and xARM Stabilization System from FLOWCINE.
€14.825,00 *
* exkl. MwSt. zzgl. Versandkosten
xSPINE Support Vest for All Body Sizes, xR3ACH Heavy-Duty Stabilization Arm, Dual-Layered Air Mesh System, QR Pins, Regular Left-Side Arm Mount
€9.170,00 *
* exkl. MwSt. zzgl. Versandkosten
Padded dock allows for docking your sled around the gimbal handle, securely fixing with a lockable lever grip.
€545,00 *
* exkl. MwSt. zzgl. Versandkosten
The eMotimo Spectrum ST4.3 is our recently released upgraded version that adds our new expansion port. The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
€4.190,00 *
* exkl. MwSt. zzgl. Versandkosten
* exkl. MwSt. zzgl. Versandkosten
Wir benutzen Cookies nur für interne Zwecke um den Webshop zu verbessern. Ist das in Ordnung? Ja Nein Für weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x