The xSPINE Cinema 2.5 / 3 mount allows an operator to quickly connect a Easyrig support bar to the back of the xSPINE using tool-less locks for quick mounting / dismounting.
The Black T-nut is a clever M12x1.75 nut for tool less or 19mm wrench tightening.
The Black Arm Vertical Dampener from FLOWCINE can be used as a replacement component in your Black Arm stabilizer, or for increased dampening when traveling over rough terrain or when supporting a heavier rig.
The kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.
The kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.
The xR3ACH Waterproof cover, is our thinnest and softest cover for the xR3ACH back mount. Its inner fleece material keeps the back mount protected from anything that might rub or scratch against it.
The Winter softshell cover is a neoprene cover that keeps your xR3ACH performing at its best at sub-zero temperature (0C/32F down to -20C/-4F).
For Black Arm 3-Axis Stabilizer, Replacement Tilt Arm Dampener, Use for Extra Dampening
The Black Arm Tilt Dampener from FLOWCINE can be used as a replacement component in your Black Arm stabilizer ...
The Black Arm Tilt Dampener from FLOWCINE can be used as a replacement component in your Black Arm stabilizer ...
The GLINK Case is a dual layered, custom foamed Peli AIR 1637 travel case, equipped with wheels and retractable handle bar for lightweight and trouble free packing of the GLINK system.
The GLINK Docking Station allows the operator to easily store all necessary GLINK parts in one place while working on set.
The GLINK docking station tool rack is a clean way to store your tools on the docking station.
2 x Spring Cores, 13-24 lb, Orange, Integral Component of GLINK Stabilizer, Polymer Spring with Soft Neoprene Coat..
CF RING FOOT 3 feet - g-Foot-3
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Holds GLINK Upright without Stand, 1/4"-20 and 3/8"-16 Female Threads, Clamps to Bottom CF Ring, Designed for GLINK Stabilization System ...
GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units assembled together servers as the main support ring for connecting to the rest of the GLINK system.
CF RING FOOT 1 foot - g-Foot-1
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Use the GLINK MoVI R2 Mount to quickly and securely attach your Freefly MoVI or DJI Ronin 2 to your GLINK setup.
The GLINK handheld mount is a telescopic mount for either hard mounted cameras and/or electronic heads such as the ARRI Trinity, MK-V Omega/AR or the Betz Wave.
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″.
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″.
The xPEG is a hook that you mount on your cart, where you can hang your Steadicam arm.
The xPEG Rip-Tie allows the operator to tighten up the arm at the bottom shelf of the cart.
The xPEG Rip-Tie allows the operator to tighten up the arm at the bottom shelf of the cart.
300mm Front extension block. For the larger frame gimbals, you may need to extend the Black a little bit.
Black Arm Tranquilizer Shore Pack 40 (24-49 lb)
BLK-TRANQ-ORING-PACK-40
BLK-TRANQ-ORING-PACK-40
Black Arm Tranquilizer Shore Pack 60 (41-76 lb)
Tranquilizer O-ring pack shore 60
Tranquilizer O-ring pack shore 60
