The kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.
The GLINK 1.5 offers significant upgrades in performance over the previous GLINK V1.0. The following features and upgrades has been done:
New retraction bracket geometry and ensures better folding behavior for the operator.
New retraction bracket geometry and ensures better folding behavior for the operator.
The Universal Rack clamps on to the tow bar of your car. It allows two Pro Clamp singles to be attached for further mounting of standard 48-51mm tubes. The Universal Rack is very easy to attach, and mounts on to any standard 50mm tow bar.
The xARM is based on polymer spring cores with a outer shell of Neoprene. Each spring core has a smooth and linear lifting capacity and when being used near their maximum ...
The Black Mitchell Nut is a Mitchell castle nut that is more narrow than most castle nuts, making it fit through the rods of our Female Mitchell mount.
Tilting Hard Mount for Steadicam, Mitchell Mount Adapter Kit, 50mm Tube, xSOCKET Block, Fits 1.9 to 2" Tubes, Titanium-Plated Stainless Steel Build.
The ezPEG is an attachment for your cart, where you can hang your Easyrig while not wearing it.
These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals.
The Black Mitchell plate is the connecting plate between the Tranquilizer/Wire AVM and your Female Mitchell mount or gimbal/Remote head.
Dual Black Case 01 - FC-BLK-Dual-Case-01
Stabilizer Rig for All Body Sizes, Heavy-Duty Gimbal Stabilization Arm, Dual-Layered Air Mesh System, QR Pins, Can Be Mounted Regular or Goofy
The Super-high/low mode link bracket, joins two arm posts with a lockable link, allowing the long and regular arm posts to be used both in high mode and low mode.
The Black T-nut is a clever M12x1.75 nut for tool less or 19mm wrench tightening.
The kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.
The kit allows you to configure your rig in super high mode, high mode and low mode. It also includes the Low mode grip handle, which allows for more comfortable hand placement for the operators control hand, when working in low mode.
The Serene Bungee grip is a small hook that holds the bungee cord in place.
It’s placed on ONE side of the Serene arm, where the bungee cord is attached. This holds it in place, so you never lose your bungee cord ever again!
It’s placed on ONE side of the Serene arm, where the bungee cord is attached. This holds it in place, so you never lose your bungee cord ever again!
52 to 64 lb Load Capacity Range, Change Core for Different Weight Setup, Pre-Extended for Quick Change ...
The FLOWCINE Black Arm Roll Dampener replaces the existing roll dampener of your FLOWCINE Black Arm stabilizer system.
GLINK Spring Cores ( 18.0 - 24.9 KG, blau ) - g-Spring-Blue *
Use the GLINK MoVI R2 Mount to quickly and securely attach your Freefly MoVI or DJI Ronin 2 to your GLINK setup.
The xDROP, is a new male socket block-to-female socket block connection bracket, that drops the arm connection to the vest approx 85mm or 3.4″ and offsets the same connection to the side 55mm or 2.2″.
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″.
The xPEG Rip-Tie also comes with a ⅜”-16 UNC threaded hole, if the user wishes to mount anything else on it (such as a eyebolt, for example).
The xSOCKET, is a universal female socket block that works on all universal Steadicam type vests, such as Tiffen(R) Exovest, GPI PRO(™) vests and all universal socket block Steadicam type arms.
