Tiffen Water White NATural IRND Filter is an ND filter with a 2x filter factor that provides exposure reduction ...
Full Sized Steadicam Dovetail Camera Plate. Slightly thicker & stiffer than the traditional Ultra camera plate and with more "logical" hole & slot placement for modern cameras.Full Sized Steadicam Dovetail Camera Plate.
The Steadicam Padded Dock, Suitable for M-Series and Volt-1.5*
The Tiffen 95mm Coarse Thread Black Pro-Mist 1/4 Filter helps to reduce the value of the highlights ...
It is a 3-pin Lemo to 6-pin Lemo connector used with Archer, Clipper, and Flyer LE systems.
12 volt power cable
12 volt power cable
Steadicam 12-inch G-70 Gimbal Arm Post for Ultra and Clipper Stabilisation Systems (800-7204-01) ...
Pan, tilt, and pull focus. This is perfect it you want to shoot on a tripod or integrate to a slider you already have.
Plattform Multiplex Ø38cm for Thoma & Gecko Cam Drehteller TD-3
Cable Pigtail XLR4 / LEMO 2
Hirose10 to Lemo8 - CineMonitorIII to Pro
Hirose10 to Hirose10 - CineMonitorIII to CineMonitorIII
Hirose10 to Lemo2 - Power for CineMonitorIII
Hirose6 to Lemo8 - Rainbow to Pro
The Transvideo 09H6 is a power cable with a Hirose 6 connector on one end and a 4-pin XLR connector on the other end.
The coiled 19.6 to 27.5" 8-Pin LEMO to 4-Pin Hirose Power/Tally Cable from Transvideo is designed to provide power and tally to the Grass Valley camera series.
The Transvideo Lemo 8 to BNC Cable (18"/45.7cm) feeds composite into HD monitors. It features TSV/Pro wiring: 3 video and 4 video Grd.
The 7.87" 8-Pin LEMO to 3 x BNC Breakout Cable from Transvideo is designed to provide RGB or YPrPb signals to the CineMonitorHD video monitor.
The 6.6' long 4.5 GHz HDTV Dual-Link BNC to BNC Cable from Transvideo is a high-performance HDTV dual cable tested at 3 GHz for Dual-Link 3G-SDI signal transmission or for sending two separate 3G-SDI signals for 3D Work.
Transvideo's Master Kit II for CineMonitorHD6 includes a bridge for Master, a pair of 16mm rods, and a yoke with bridge 89-16.
Transvideo's Artemis Kit II for CineMonitorHD6 includes a bridge for Artemis, a pair of 16mm rods, and a yoke with bridge 89-16.
Yoke for Stargate - universal multirods bracket
New universal bracket for CinemonitorHD 6’’, CinemonitorHD 8’’ and Stargate. You change the inserts depending of the rods you have and you adjust ...
Yoke for CineMonitorHD6 - multi rods adapter 15mm/56mm, 5/8" / 3"-3.5"
10” 3G/HD/SD - SDILCD Monitor, Dedicated to Stereoscopic 3D productions
