Sale
Camera carrying system with 230mm longer, adjustable boom for cameras between 8-10kg...
Sale
EASY-G352A - EASYRIG 3 GimbalVest 500N +130 - payload 10 - 12 kg
Sale
EASY-G342A - EASYRIG 3 GimbalVest 400N +130 - payload 8 - 10 kg
Sale
EASY332A - EASYRIG 3 Cine 300N +130mm - Payload 5-8kg
Sale
EASY-G352 - EASYRIG 3 m. GimbalVest 500N - payload 10 - 12 kg
Sale
EASY352 - EASYRIG 3 Filmweste 500N - Payload 10-12kg
Sale
EASY332 - EASYRIG 3 Filmweste 300N - payload 5-8kg
Sale
EASYRIG 5 Vario Gimbal, EASY-VG582, payload between 5 - 17kg ...
Sale
EASYRIG 5 Vario Cinema +230 - EASY-VC582B - payload kg 5- 17kg
Additional MiniClamp for Zen PRO Core, designed to accommodate rods measuring 16mm (0.625 inches). SKU: 000010272
The 2-Section 1.58" Post for M-Series Camera Stabilizer from Steadicam is a crucial part of the M series Steadicam camera stabilizer line. This two-section post features a height adjustment of 21.7 to 38.9".
Add a third battery plate to your M2 sled with this 12/24V Third Battery Mount with Dovetail from Steadicam. This plate features a single Gold mount battery plate with 12/24 VDC switching and two 2-pin power outputs ...
Universal camera plate compatible with most sleds on the market. Equipped with safety locking screws.
Designed to seamlessly integrate with your existing monitor mount, this kit allows for a more aligned and vertical positioning of your LCD monitor. Enjoy improved viewing angles and a more streamlined setup for your Matrix Sled.
Maximize motion control, Underneath the hood of the Conductor Sa2.6 is a first of its kind array of processors that can seamlessly control pan/tilt/roll/focus/zoom/monorail, all at the same time.
190Wh capacity. Each CUE-J series battery has single built-in D-Tap output capable of taking a 80W load and a 4-LED power indicator.
For 2nd Dock/Cart/Moses Pole. Gives a compact solution for an end-point dock, or super compact where a standard docking bracket may be excessive.
It minimize the oscillation of Zen due to improper installation granting a more stable behavior especially on low mode.
The XTDongle enables seamless connectivity between PCs or Macs and any XTBus-compliant device, allowing you to fully utilize the new port capabilities.
14.5V 145Wh* 14A High Load micro V-mount with Digital Data, V-Torch, 1 x USB-PD.+ 1 x D-Tap O/P ...
M-SERIES MINI DOCKING BRACKET WITH 3/4", 5/8", 1/2" PINS
Sale
Weight: 13-lbs/5.9kg, Boom Range: 29"/737mm, Minimum Lift Capacity: 13-lbs/5.9kg, Maximum Lift Capacity: 70-lbs/31.8kg ...
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum ST4/ST4.3 or the M1/M2 motor ports of the Conductor SA2.6
It can be used to power the following products
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
