Volt and accessories

Sort by:

The Volt Rain Cover is designed to protect your Volt and Gimbal from the elements, while allowing you to operate your Steadicam. Made from motorcycle grade, waterproof fabric, with Velcro seals. Fits all sled posts 1.5”-1.85”
€275,00 *
* Excl. tax Excl. Shipping costs
GPI Pro Universal Volt Mounting Plate for the Preston MDR2 and 3. Fits to the underside of the Volt Control box for mounting Preston 2 & 3, from the Pro Diving Board.
€185,00 *
* Excl. tax Excl. Shipping costs
Full Sized Steadicam Dovetail Camera Plate. Slightly thicker & stiffer than the traditional Ultra camera plate and with more "logical" hole & slot placement for modern cameras.Full Sized Steadicam Dovetail Camera Plate.
€475,00 *
* Excl. tax Excl. Shipping costs
THIS ROD MOUNT BRACKET CAN MOUNT DIRECTLY TO THE VOLT CONTROL BOX OR
TO THE 817-7915 VOLT CONTROL BOX & MDR MOUNTING PLATE FOR PRO. USE WITH SHADOW, ARCHER AND NON STEADICAM SYSTEMS.
€175,00 *
* Excl. tax Excl. Shipping costs
Nose Box Rod Mount Bracket #800-7910 ...
€265,00 *
* Excl. tax Excl. Shipping costs
All new, re-designed pulley wheel for the Steadicam Volt enabled gimbal. Reinforced and lower profile side walls.
€79,50 *
* Excl. tax Excl. Shipping costs
Volt Control Box Rod Mount 60mm x 15mm, For mounting the external Volt Control Box to 15mm bars ...
€145,00 *
* Excl. tax Excl. Shipping costs
All new, re-designed pulley wheel for the Steadicam Volt enabled gimbal. Reinforced and lower profile side walls.
€54,50 *
* Excl. tax Excl. Shipping costs
M2 Internal Volt Sensor - Volt Pan Encoder Sensor / VOLT PAN SENSOR, M2 GIMBAL spare
€465,00 *
* Excl. tax Excl. Shipping costs
Send tally status to your Steadicam monitor when it is installed on a Steadicam sled with this Tally Cable with Sensor and Repeater from Steadicam.
€345,00 *
* Excl. tax Excl. Shipping costs
Suitable for all Volt versions. M-Series, Volt-1.5 Gimbal . Shadow, Archer2, GPI Pro,
Betz Rig
€9,80 *
* Excl. tax Excl. Shipping costs
M1 Internal Volt Sensor - Volt Pan Encoder Sensor
€465,00 *
* Excl. tax Excl. Shipping costs
compact and light flight case (type Pelicase) for M-1 & M-2 sled with laser-cut compartment in solid foam ...
€925,00 *
* Excl. tax Excl. Shipping costs
3rd Battery Mount Kit for the base of our Steadicam sleds. Includes switching for 12/24v and connects into the sleds power harness ...
€1.175,00 *
* Excl. tax Excl. Shipping costs
Volt 44" special control cable with 8P Lemo angle - 8P Lemo
€410,00 *
* Excl. tax Excl. Shipping costs
Volt 28" special control cable with 8P Lemo angle - 8P Lemo
€398,00 *
* Excl. tax Excl. Shipping costs
Steadicam Volt power cable with flexible braided sleeve. 10 centimeters ...
€270,00 *
* Excl. tax Excl. Shipping costs
Steadicam Volt power cable with flexible braided sleeve. 10 centimeters
Supplied with 3 pin right angle 0b lemo to select sled connectors ...
€290,00 *
* Excl. tax Excl. Shipping costs
All new, re-designed pulley wheel for the Steadicam Volt enabled gimbal. Reinforced and lower profile side walls.
€59,50 *
* Excl. tax Excl. Shipping costs
* Excl. tax Excl. Shipping costs

Steadicam Volt™ System ; a tool that provides Steadicam operators with horizontal stabilization, giving them the ability to easily transition between fully manual and auto assist modes. Weighing only two pounds, the Volt System seamlessly integrates into an existing sled, providing greater opportunity for content creation without jeopardizing stability.

The Steadicam M1-Volt Evolution continues with the addition of Steadicam Volt -Powered Gimbal upgrades for the Steadicam Archer2, Shadow and Shadow-V, as well as Steadicam Ultra2 and Clipper3 models. Volt for the GPI Pro systems will soon be available as well for both the Pro and Cine-Live models and can be purchased as a retrofit for the GPI Pro gimbal, or as a complete system with a M1-type gimbal for 1.5” post. The two pound Volt system is unique  in that it mounts directly to the gimbal, therefore adding no weight or height to the stage or base.  Garrett Brown, Inventor of the Steadicam said “This is the most significant advancement in operating since the invention of the Steadicam over 40 years ago”.

 

 

 

 

 

 

 

 

Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x