The low mode grip handle allows for more comfortable hand placement for the operators control hand when working in low mode. Instead of controlling the gimbal handle, the operator have the option to have better reach and control using this grip handle.
Sale
Compatible with Sony BP-U Battery Slots, 14.4V, 48Wh Capacity, D-Tap Output, USB-C PD Output, 4-Stage LED Power Indicator, Charges in IDX Chargers ...
14.4V 96Wh BPU mount Rechargeable Lithium Ion Battery with 1 x D-Tap + USB PD (In and Out) ...
77mm Water White Glass NATural IRND 1.2 Filter is a neutral density filter with a 16x filter factor that provides a 4-stop exposure reduction.
Quickly recharge your USB Type-A and Type-C devices and batteries with this UC-PD2 Pocket Travel Fast Charger & Power Supply from IDX System Technology.
The angled low mode bracket is used join various extended length xARM arm posts with a normal arm post, at a 15 degree angle.
CL-UC1, Olympus connector supports:
CL-UC1, Olympus connector supports Olympus: E520 E510 E420 E410 E300,SP-570 UZ,SP-560 UZ,SP-550UZ,SP-510 UZ.
CL-UC1, Olympus connector supports Olympus: E520 E510 E420 E410 E300,SP-570 UZ,SP-560 UZ,SP-550UZ,SP-510 UZ.
CL-S1, Sony connector supports:
Sony a900, Sony a700, Sony a350, Sony a300, Sony a200, Sony a100, Sony a100K, a100,a77,a65,a57,a55,a37,a35,a33, a99
Sony a900, Sony a700, Sony a350, Sony a300, Sony a200, Sony a100, Sony a100K, a100,a77,a65,a57,a55,a37,a35,a33, a99
Sale
3 Gimbalrig 600N (Standard) With Easyrig STABIL G3, the 600N arm is designed to take weights between 13-15 kg ...
Sale
3 GimbalRig 500N (large) with Easyrig STABIL G3 - EASY-G353ST
Sale
3 GimbalRig 750N (standard) with extended arm +230mm/9in - EASY-G373B
The Black T-nut is a clever M12x1.75 nut for tool less or 19mm wrench tightening.
The Black Arm Vertical Dampener from FLOWCINE can be used as a replacement component in your Black Arm stabilizer, or for increased dampening when traveling over rough terrain or when supporting a heavier rig.
Protects your Stabil and Stabil G2 arm from dirt and scratches.
IDX BH-2 (BH2) ENDURA ELITE Battery Housing Only. PLEASE NOTE: This item is the Housing Only - Cartridges are NOT included.
Movement: ST4 - 4 axis motion controller - Pan/Tilt/Focus and Slide on Dana Dolly
ST4.3 - 7 axis motion controller - Pan/Tilt/M3/M4 ports with up to 3 Tilta Nucleus M Motors.
ST4.3 - 7 axis motion controller - Pan/Tilt/M3/M4 ports with up to 3 Tilta Nucleus M Motors.
The xR3ACH Waterproof cover, is our thinnest and softest cover for the xR3ACH back mount. Its inner fleece material keeps the back mount protected from anything that might rub or scratch against it.
The FLOWCINE Black Arm Roll Dampener replaces the existing roll dampener of your FLOWCINE Black Arm stabilizer system.
Note: The Universal Rack ships WITHOUT the two single clamps. These needs to be purchased separately.
Shipping weight: 2.6 kg
Shipping dimensions: 30 × 10 × 11 cm
Shipping weight: 2.6 kg
Shipping dimensions: 30 × 10 × 11 cm
The GLINK Docking Station allows the operator to easily store all necessary GLINK parts in one place while working on set.
The GLINK docking station tool rack is a clean way to store your tools on the docking station.
CF RING FOOT 3 feet - g-Foot-3
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Holds GLINK Upright without Stand, 1/4"-20 and 3/8"-16 Female Threads, Clamps to Bottom CF Ring, Designed for GLINK Stabilization System ...
CF RING FOOT 1 foot - g-Foot-1
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Feet for your CF Ring, to be able to put down your rig without a docking stand.
