Set bestehend aus : Xspine Weste, Front Mount, XBone CF
xSPINE Vest, xBONE CF, and Front Mount Stabilization System
Capture professional, smooth camera movements by flying your rig with the xSPINE Vest, xBONE CF, and Front Mount Stabilization System from FLOWCINE. The camera's weight is distributed to the shooter's torso, and the spring cores of the articulating stabilization arm enable your rig to float through the set, creating an immersive experience for the audience as it follows your subject through the scene.
The front mount can slide down on the vest's vertical rails to create a lower center of gravity, depending on the camera operator's preference. The back-mounted xBONE extends around the torso, providing a mounting point for the xARM component. With its adjustable height and ambidextrous design, this stabilization system can be customized to be used by multiple shooters as it is passed between the A, B, and C cameras.
FLOWCINE xSPINE Vest
The xSPINE Vest from FLOWCINE is the world’s first universal vest made for all kinds of camera operators in mind, made for versatility and moveability. The xSPINE can currently be used for Steadicam™ operation both as front and back mount in various configurations. It also allows the operator to mount a gimbal support system such as the GLINK. There will be more mounting options and accessories down the road as well. The xSPINE is a low-weight, 8.6 lb vest designed to be as comfortable and rigid as possible. The pads include a dual layered air mesh system with air channels, enabling good ventilation while at the same the memory foam makes the vest very comfortable to wear. All parts are made with strong carbon fiber and/or low-weight aluminum, creating a rigid cage that equally distributes the carried payload in the best way possible.
All main sections such as front, back and sides can be detached with quick release pins, to allow the vest to be packed down in a very slim format. All parts are also fully adjustable for different operator sizes. The curved carbon fiber bars in the front keeps the chest region free to ease breathing, also making it an excellent choice for all body size operators. The xSPINE incorporates dual locked ladder strap adjustments in the front, quickly enabling the operator to adjust settings on the fly, and be able to open up or close any side of the vest. The buckles are designed so no accidental opening can be performed, while still allowing the operator to open them safely even while carrying payload to perform adjustments or corrections while resting. The extra wide straps keep the vest as rigid as possible while maintaining an easy procedure for opening and closing the vest. The xSPINE ships in a soft bag that has room for the vest and the optional xBONE CF. There is also a hard Peli case for rougher travel as an accessory.
FLOWCINE xBONE CF Back Mount for xSPINE Vest Stabilization System
Camera operators who would like to attach a stabilization arm to their xSPINE vest can do so via this xBONE CF Back Mount from FLOWCINE, which extends a standard universal socket block to the shooter's left or right. This enables it to be connected to a variety of support arms, including models from GPI Pro, Tiffen, or the xARM from FLOWCINE.
The arm can slide down on the vest's back rails to create a lower center of gravity, and its distance from the hip can be tweaked for optimal balance, depending on the camera operator's preference. With its adjustable height and ambidextrous design, the xBONE CF can be customized to be used by multiple shooters as it is passed between the A, B, and C cameras.
Mount Stabilization Arms onto xSPINE
The xBONE CF Back Mount extends its universal socket block off to the shooter's side, allowing proper alignment when attaching an existing stabilization arm. It is compatible with reputable manufacturers like Tiffen and GPI Pro, along with another product in the xSPINE array, the xARM.
Customizable Height and Lateral Position
The xBONE CF is designed to slide 225mm up and down along the center rails on the back of the xSPINE, enabling the camera operator to choose a height that is most comfortable. The strong and lightweight carbon fiber xBONE can be adjusted 80mm laterally to either create or reduce space away from the person's waist.
Adjustable Socket Block
The universal socket block is adjustable on both the roll and tilt axes, enabling an existing stabilization arm to be positioned according to the specific needs of the shooter.
Regular or Goofy
The front mount can be secured either regular or goofy, accommodating both left- and right-handed shooters.
In the Box
. xSPINE Vest and Front Mount Stabilization System
. xSPINE Vest
. xSPINE Front Mount
