Maximize motion control, Underneath the hood of the Conductor Sa2.6 is a first of its kind array of processors that can seamlessly control pan/tilt/roll/focus/zoom/monorail, all at the same time.
Already own a Conductor SA2.6 and a RigWheels Monorail? The Monorail Conductor Integration Kit includes what you need to motorize your Monorail system.
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
This is a DTAP to 2.1mm x 5.5mm barrel connector - center positive. The barrel connector is locking with a screw.
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum ST4/ST4.3 or the M1/M2 motor ports of the Conductor SA2.6
If you have a compatible DJI Gimbal (RS2 and RS3) and want an all inclusive setup, this kit adds eMotimo's iFootage Shark Slider + Integration kit with our direct drive motor.
If you have a compatible DJI Gimbal (RS2 and RS3) and an unmotorized Dana Dolly, this kit adds eMotimo's Dana Dolly integration kit.
The SA2.6 is a powerful motion controller for videographers and filmmakers. If you already own a DJI RS2 or RS3 gimbal, you can now easily combine it with linear motion and turntables to accomplish common motion control tasks.
Already own a Spectrum ST4 and a Dana Dolly? The eMotimo Dana Dolly Integration Kit includes almost everything you need to motorize your Dana Dolly for your Spectrum. To motorize your kit, simply mount up the motor, belt clamps, belt, and your Spectrum.
Already own a Spectrum ST4 and a Dana Dolly? The eMotimo Dana Dolly Integration Kit includes almost everything you need to motorize your Dana Dolly for your Spectrum. To motorize your kit, simply mount up the motor, belt clamps, belt, and your Spectrum.
The SA2.6 is a powerful motion controller for videographers and filmmakers. If you already own a DJI RS2 or RS3 gimbal, you can now easily combine it with linear motion and turntables to accomplish common motion control tasks.
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum.
Geared motor mount, Motor & Pully for Dana Dolly ...
the ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
CL-UC1, Olympus connector supports:
CL-UC1, Olympus connector supports Olympus: E520 E510 E420 E410 E300,SP-570 UZ,SP-560 UZ,SP-550UZ,SP-510 UZ.
CL-UC1, Olympus connector supports Olympus: E520 E510 E420 E410 E300,SP-570 UZ,SP-560 UZ,SP-550UZ,SP-510 UZ.
CL-CB1, Olympus connector supports: Olympus: E1,E3,E10,E20,E30.
CL-S1, Sony connector supports:
Sony a900, Sony a700, Sony a350, Sony a300, Sony a200, Sony a100, Sony a100K, a100,a77,a65,a57,a55,a37,a35,a33, a99
Sony a900, Sony a700, Sony a350, Sony a300, Sony a200, Sony a100, Sony a100K, a100,a77,a65,a57,a55,a37,a35,a33, a99
Nikon CL-DC2 connector supports:
D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3100, D600, D610, D90, Z6, Z7
D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3100, D600, D610, D90, Z6, Z7
Nikon CL-DC1 connector supports: Nikon D70, D80
Nikon CL-DC0 (10-Pin) connector supports:
Nikon D1H, D1X, D2H, D2X, D2Xs, D2Hs, D200, D3, D4, D4s, D300, D700, D800, D810, D850, F90x, F90, F100, F6, F5 Kodak DCS-14n Fujifilm S3 Pro, S5 Pro
Nikon D1H, D1X, D2H, D2X, D2Xs, D2Hs, D200, D3, D4, D4s, D300, D700, D800, D810, D850, F90x, F90, F100, F6, F5 Kodak DCS-14n Fujifilm S3 Pro, S5 Pro
Alpha a9, a7, a7 II, a7 III, a7R, a7R II, a7R III, a7S, a7S II, a6500, a6400, a6300, a6000, a5100, a5000, a3000, a77 II, a58
Cyber-shot RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VI, RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II ...
Cyber-shot RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VI, RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II ...
1DX Mark II, 1D X, 1D C, 1Ds Mark III, 1Ds Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5DS R, 5DS, 5D Mark IV, 5D Mark III, 5D Mark II, 5D, 50D, 40D, 30D, 20D, 10D, 6D Mark II, 6D, 7D Mark II, 7D
This cable connects a WeMacro Rail Motor (not included) to an external motor port on your ST4/ST4.3. This cable is 4.9 feet in length.
