€ 1.750,00 exkl. MwSt. zzgl. Versandkosten

Tilting Hard Mount for Steadicam, Mitchell Mount Adapter Kit, 50mm Tube, xSOCKET Block, Fits 1.9 to 2" Tubes, Titanium-Plated Stainless Steel Build.

Lieferzeit:
3-4 Werktage / 3-4 working days
Artikelnummer::
x-xMount-mitch-kit

Key Features

Tilting Hard Mount for Steadicam
xSOCKET Block, Fits 1.9 to 2" Tubes
Mitchell Mount Adapter Kit, 50mm Tube
Titanium-Plated Stainless Steel Build

Mount and adjust an xARM or other stabilizer arm for use with a Steadicam with this xMOUNT and Mitchell Boom Kit from Flowcine. The mount can attach to a pipe with a 1.9 to 2" diameter and provides tilt and roll angles up to 22.5° to accommodate steep angles and slopes. The kit comes with four step-down adapters to fit different pipe diameters, and it includes two custom-cut foam inserts to secure each device into optional Pelican Storm iM2075 cases.

It features two sturdy 1/4"-20 UNC knobs to keep it secure. The kit also includes a male Mitchell adapter with a 2" tube, allowing you to mount an arm onto a female Mitchell mount. The assembly is constructed with durable titanium-plated stainless steel.

Key Features
The tilt axis is easily controlled by two large knobs. Once the sled is positioned close to the center of gravity of the rig, turning the tilt adjustment is effortless, making it very quick and easy to find the correct angle where the sled does not want to drift either fore and aft or left to right.

The xMOUNT has a +/-22.5° tilt adjustment for heavy slopes and extreme angles.

The xMOUNT comes with two clamps made for 1.9 to 2" (48 to 51mm) tubes. The clamps also have four POM adapter rings attached to exactly fit OS Products like the Jackal rickshaw (48.3mm diameter tubes). These can easily be slid out when used with normal 2" speed rails. More step-down rings will be released in the future for 1.25 and 1.5" tubes.

The xMOUNT can be mounted either on the left or right side, giving the operator a quick way of changing the setup on the fly if needed. The clamps can also easily be flipped if the operator wants the locking eye bolt screw on the opposite side.

This kit includes a Mitchell adapter. The adapter is a 2" (50mm) tube made with the exact height of the xMOUNT to allow a small and tight package that can be mounted onto standard female Mitchell mounts.
The xMOUNT Mitchell adapter comes with a stainless steel 2.75" UN Mitchell nut.

x-xMount-mitch-kit

The xMOUNT is a highly robust hard mount for Steadicam(™) usage, where the operator can easily dial in roll and tilt angle, without the need of unmounting the arm when making adjustments. 

The xMOUNT includes Flowcines female xSOCKET block, made out of titanium plated stainless steel, which ensures compatibility with all universal male socket blocks on the market. Due to its design, the xSOCKET gives more roll angle adjustment than other socket blocks (up to +/-16.5 degrees, depending on male socket block), and comes with two 40mm long custom  1-¼”-20 UNC adjustment knobs.

The xMOUNT can be mounted both on the left and right side, giving the operator a quick way of changing the setup on the fly if needed. The clamps can also easily be flipped if the operator wants the locking eye bolt screw on the opposite side.

The tilt axis is easily controlled by two large knobs. Once the sled is positioned close to the center of gravity of the rig, turning the tilt adjustment is effortless, thus making it very quick and easy to find the correct angle where the sled does not want to drift either fore and aft or left to right. The xMOUNT has a huge +/-22.5 tilt degree adjustment, perfect for heavy slopes etc.

THE XMOUNT MITCHELL ADAPTER KIT

The xMOUNT can also be purchased in a kit with a Mitchell adapter. The adapter is a 50mm tube, that is made with the exact height of the xMOUNT, to allow a small and tight package that can be mounted on standard female mitchell. The xMOUNT Mitchell adaptor comes with a stainless steel 2-¾” UN Mitchell nut.

The xMOUNT comes with two clamps made for 48-51mm tubes. The clamps also have four POM adapter rings attached, to exactly match OS Products – Jackal rickshaw for perfect fit (48.3mm diameter tubes). These can easily be slid out when used with normal 50mm or 2” speed rails. More step down rings will be released soon (for 1-¼” tubes and 1-½” tubes).

Note: The xMOUNT comes in foam/box that is fitted for a Pelican Storm Case iM2075. So the foam is prepared to be transferred into a case (not included) if needed.

In The Box

  • 1 x xMOUNT
  • 2 x 1-¼”-20 UNC 40mm adjustment knobs
  • 4 x POM 48.3mm diameter step down adapters
  • xMount custom foam that fits inside a iM2075 Pelican Storm Case
  • 1 x xMOUNT Mitchell adapter
  • 1 x Stainless steel 2-¾” UN Mitchell nut
  • Mitchell adapter custom foam that fits inside a iM2075 Pelican Storm Case
0 Sterne, basierend auf 0 Bewertungen Ihre Bewertung hinzufügen
Hinzufügen
Verwenden Sie Kommas um Schlagworte zu trennen.
Wir benutzen Cookies nur für interne Zwecke um den Webshop zu verbessern. Ist das in Ordnung? Ja Nein Für weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x