The new SmartSystem SmartCAM TEMPO is an SDI splitter featuring a rugged aluminum design. It supports 12G SDI inputs, offers two SDI outputs, and has a built-in OLED screen to display signal information and diagnostic data ...
3Studs plate addon kit for SmartSystem monitor. It includes a jumper cable from DTAP to monitor.
Universal camera plate compatible with most sleds on the market. Equipped with safety locking screws. Total compatibility with VersaHead ...
J-Bracket with 5/8" arm post designed for steadicam® M2 Gimbal- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ...
Introducing the Featherlight Silver Spring, a special ultra-light spring designed exclusively for the original ArmX1. It can be paired with Obsidian Black or Blue Breeze standard springs to reduce springiness in specific critical payloads ...
Docking rings for Matrix sled compatible with Matrix Sled Docking Bracket only.
Monitor rods with clamp designed to fit 1.5" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.37" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Additional bracket for Matrix Sled for a safe and decoupled connection for low mode monitor.Compatible only with M8 d.15 threaded carbon fiber rods.Distance Center-to-Center = 60mmNOTE: no rods are included in this package
ArmX1 arm post with 1/2″ diameter and stickout of 140mm / 5.5″
With 368grams / 0.82 lbs, made with S31803 Duplex stainless steel, it grants ultimate strength and fatigue durability.
comes with: 15mm carbon fiber rods with embedded battery joint, Locking knob, Nylon washer
J-Bracket with 5/8" arm post designed for steadicam® M1 Gimbal- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® - ...
U-Bracket designed to be compatible with steadicam® M2 gimbalIt let you increase the distance from the arm post and the Sled handle ...
U-Bracket designed to be compatible with steadicam® M1 gimbalIt let you increase the distance from the arm post and the Sled handle ...
Professional gimbal with dual bearings configuration for every axis
Counterweight plate designed to add mass on the bottom of your Matrix R2 ...
Counterweight plate with 10x counterweights included specifically designed
Counterweight designed to add mass on the bottom of your Matrix Sled if necessary. Every counterweight has a weight of 250gr / 0.5lbs (M4 screw included)Please note that the image is for reference and the color of the counterweight could be different ...
MATRIX DOVETAIL CAMERA PLATE [STANDARD], Length : 6.7inches (170mm)
Long Dovetail camera plate for Matrix Sleds, Length : 13 inches (330mm)
Multi-core CPU 6 sensors multi-axis digital level indicator, Powered via USB or pushpull connector with daisy chain possibility, Case milled from solid aluminum, shot-peened and hard anodized ..
specifically designed for SM7 PRO 3G, it is possible to mount it on brackets that require central attachment under the monitor.
it matches perfectly the weight of the standard counterweight with the ability to precisely tuning the position of the outer bell increasing the momentum on the gimbal handle.
ProCam Motion ein kalifornisches Unternehmen aus Los Angeles - Burbank, dass sich auf Schienen / Dolly Systeme sowie Auto Saugstative spezialisiert hat. Qualitativ sehr hochwertige Produkte wie einfache Handhabung.
Camera Dolly Dual Spike Cup Demo Video from ProCam Motion
Camera Dolly and Track Demo Video from ProCam Motion
Camera Dolly Straight Track Demo Video from ProCam Motion
ProCam Motion User Videos 2015
Camera Dolly Brake Demo Video from ProCam Motion
Camera Dolly Tripod Anchor Demo Video from ProCam Motion
Riser Kit Demo Video
Dolly Platform Demo Video
Behind The Scenes ProCam Motion Camera Dolly On Location Video
