ProCam Motion Riser Kit inkl. 100mm Halbkugel
Riser Kit hat eine maximale Traglast bis 50lbs / 22.6kg, zusätzliche Höhe bis 30cm ...
- Lieferzeit:
- 5-7 Werktage / 5-7 working days
Riser Kit has a maximum load capacity of 50lbs / 22.6kg.
Can be combined with the Dolly System from ProCam Motion.
75mm hemisphere optimally available.
The riser kit raises the camera about 15cm / 6 inches or about 30cm / 12 inches above the dolly.
The Riser comes with:
1x Camera Plate
1x 100mm Cup
3x Universal Knobs
3x Six inch and 3 Twelve inch legs
1x Carry Pouch Easy set up.
No tools required! Item Nr. 200-1000
The Riser will hold up to 50lbs (22.6kg) of camera weight.
The Riser Kit will raise the camera 6 inches or 12 inches above the dolly.
The Kit also comes with a 100mm Cup to mount your tripod head (If you need a 75mm Cup Insert please see below). You can also mount the camera flat on the camera plate by removing the 100mm Cup (NOTE: Multi-Mount Knob Kit is needed)
Easy set up. No tools required!
NOTE: To mount the camera flat to the Riser Kit Plate, remove the 100mm Cup to use the ProCam Motion MULTI MOUNT KNOB KIT (sold separately)
ProCam Motion manufactures and sells protable and professional camera support systems. Camera Dolly and Camera Sliders.
