eMotimo

Sortieren nach:

the ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
€875,00 *
* exkl. MwSt. zzgl. Versandkosten
1DX Mark II, 1D X, 1D C, 1Ds Mark III, 1Ds Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5DS R, 5DS, 5D Mark IV, 5D Mark III, 5D Mark II, 5D, 50D, 40D, 30D, 20D, 10D, 6D Mark II, 6D, 7D Mark II, 7D
€24,50 *
* exkl. MwSt. zzgl. Versandkosten
The eMotimo Spectrum ST4.3 is our recently released upgraded version that adds our new expansion port. The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
€4.190,00 *
* exkl. MwSt. zzgl. Versandkosten
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig. Direct Drive Motor ...
€4.190,00 *
* exkl. MwSt. zzgl. Versandkosten
This is a custom cable that runs from the Spectrum ST4's i/o port to the Nodo Inertia Wheels Receiver (RX).
€55,00 *
* exkl. MwSt. zzgl. Versandkosten
IFOOTAGE EXTENSION TUBE KIT - ST4MAC_IF6
€225,00 *
* exkl. MwSt. zzgl. Versandkosten
The eMotimo 100mm arca compatible plate works with arca clamps ...
€48,50 *
* exkl. MwSt. zzgl. Versandkosten
MICRO USB TO USB CHARGING CABLE FOR PS4 DUALSHOCK CONTROLLER
€14,50 *
* exkl. MwSt. zzgl. Versandkosten
iFootage Shark Slider S1 + Motor Pod Bundle, MAC_SK_DD - Direct Drive Motor
€1.095,00 *
* exkl. MwSt. zzgl. Versandkosten
eMotimo spectrum ST4 Run & Gun Bundle, smallest and lightest 4-axis bundle ...
€3.790,00 *
* exkl. MwSt. zzgl. Versandkosten
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum.
€125,00 *
* exkl. MwSt. zzgl. Versandkosten
Already own an eMotimo Spectrum? The iFootage Shark Slider S1 + Motor Pod Bundle is a great 3rd axis accessory that comes with everything you need to connect to your Spectrum, right out of the box.
€1.090,00 *
* exkl. MwSt. zzgl. Versandkosten
MAC_SMC_EXT100 - Spectrum Motor Extension Cable - 10FT
€78,50 *
* exkl. MwSt. zzgl. Versandkosten
MAC_SMC_EXT55 - Spectrum Motor Extension Cable - 5.5FT
€54,00 *
* exkl. MwSt. zzgl. Versandkosten
The eMotimo Shark S1 integration Kit includes everything you need to mount your Spectrum to your iFootage slider to create outstanding multi-axis shots
€415,00 *
* exkl. MwSt. zzgl. Versandkosten
Stepper Motor Pod for Kessler allows the spectrum ST4 to drive various Kessler sliders.
€425,00 *
* exkl. MwSt. zzgl. Versandkosten
This is an an easy and inexpensive solution for mounting the spectrum ST4 ...
€75,00 *
* exkl. MwSt. zzgl. Versandkosten
Replacement Belts for your Shark System
€24,00 *
* exkl. MwSt. zzgl. Versandkosten
Gold-Mount Upgrade and Retrofit - POW_GMUR
€375,00 *
* exkl. MwSt. zzgl. Versandkosten
Fz Height Adjuster + HW - Replacement part - ACC_FZHA
€39,00 *
* exkl. MwSt. zzgl. Versandkosten
V Mount Upgrade and Retrofit - POW_VMUR
€325,00 *
* exkl. MwSt. zzgl. Versandkosten
this device takes an RJ45 Network Cable in. Once configured, this Network adapter has an assigned IP address that is addressable from Skaarhoj PTZ controllers.
€198,00 *
* exkl. MwSt. zzgl. Versandkosten
Balance your camera by sliding it forwards and backwards with our Forward/Backwards Adjustment Plate & Clamp. Mount either a 100mm or 150mm arca plate to the bottom of your camera.
€145,00 *
* exkl. MwSt. zzgl. Versandkosten
Balance your camera by sliding it forwards and backwards with our Forward/Backwards Adjustment Plate & Clamp. Mount either a 100mm or 150mm arca plate to the bottom of your camera.
€145,00 *
* exkl. MwSt. zzgl. Versandkosten
* exkl. MwSt. zzgl. Versandkosten

Mission Statement

eMotimo is a small, passionate, hands-on company, driven to create the highest-value camera products on the market. We enable photographers and cinematographer of all levels, to produce their visions and capture their moments in motion!

History

eMotimo was inspired by techniques used in the filming of the documentary series, Planet Earth. How’d it all start? The founder, Brian, who has a strong background in photography and engineering, wanted to produce similar shots himself, but the technology and products on the market were too expensive and difficult to use. He set out to make his own.  eMotimo was born in 2010 and sold its first eMotimo PT in January 2011.

Values

We put a ton of our energy into creating our high-value, feature-heavy products.  We deliver what we promise.  We care deeply about customer service and the success of our users.   Our commitment to our community is long term.  We care about participation and work to have a voice in the camera/film/broadcast community.  We want to be a part of your kit – without ever locking you into a brand.  We focus on integration with other vendors.

Build quality

All eMotimo products are designed, assembled, and run through QA in our San Diego headquarters before they are shipped to you. We take a tremendous amount of pride in the quality of our products.  By assembling and testing them in our own shop, we can pay close attention to each and every part that goes out our door.

Future

We will continue to make products that push the camera/video/broadcast industry forward.  We are a team of creatives, inspired by creatives.  We are constantly evaluating new ideas and innovations to bring to our customers. We hope our products will continue to mix up the industry and enable users of all levels to do amazing things.

 

Wir benutzen Cookies nur für interne Zwecke um den Webshop zu verbessern. Ist das in Ordnung? Ja Nein Für weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x