eMotimo

Sortieren nach:

This is a 6 foot DC extension cable: 2.1mm male/female, straight plugs, black, 18AWG. This extension cable is used to add additional length between your battery and your TB3 or to extend your ST4 AC/DC adapter.
€19,80 *
* exkl. MwSt. zzgl. Versandkosten
The eMotimo Spectrum ST4 is a motion control pan and tilt head. The Spectrum is an advanced 4-axis motion controller for cinematography and photography that is faster, more accurate, and easier to use than anything else on the market.
€4.190,00 (€4.355,00 / ) *
* exkl. MwSt. zzgl. Versandkosten
150mm arca compatible plate works with arca clamps. Mount this plate to the bottom of your camera or slider ...
€54,00 *
* exkl. MwSt. zzgl. Versandkosten
IFOOTAGE EXTENSION TUBE KIT - ST4MAC_IF6
€225,00 *
* exkl. MwSt. zzgl. Versandkosten
iFootage Shark Slider S1 + Motor Pod Bundle, MAC_SK_DD - Direct Drive Motor
€1.095,00 *
* exkl. MwSt. zzgl. Versandkosten
The eMotimo Fz motor is light, elegant, powerful, and the perfect addition to your Spectrum ST4.
€495,00 *
* exkl. MwSt. zzgl. Versandkosten
For the DIY'r, these stepper motors allow you to drive a dolly ...
€128,00 *
* exkl. MwSt. zzgl. Versandkosten
Stepper Motor Pod for Kessler allows the spectrum ST4 to drive various Kessler sliders.
€425,00 *
* exkl. MwSt. zzgl. Versandkosten
Replacement Belts for your Shark System.
The Direct Drive motor uses the shorter 89 Tooth MXL belt
The 14:1 and other Geared Motors uses the longer 104 Tooth MXL Belt
€19,50 *
* exkl. MwSt. zzgl. Versandkosten
Power your spectrum ST4 with the 12 Volt AC Adapter. This adapter is 12 volts with a barrel connector size of 2.1mm x 5.5mm x 12mm.
€48,50 *
* exkl. MwSt. zzgl. Versandkosten
Fz Height Adjuster + HW - Replacement part - ACC_FZHA
€39,00 *
* exkl. MwSt. zzgl. Versandkosten
Balance your camera by sliding it forwards and backwards with our Forward/Backwards Adjustment Plate & Clamp. Mount either a 100mm or 150mm arca plate to the bottom of your camera.
€145,00 *
* exkl. MwSt. zzgl. Versandkosten
works with Rhino network motor cables and the eMotimo spectrum ...
€64,00 *
* exkl. MwSt. zzgl. Versandkosten
Spectrum ST4 Pro Pan/Tilt Head with Portable Dana Dolly Kit (V-Mount) ...
€5.150,00 *
* exkl. MwSt. zzgl. Versandkosten
eMotimo Spectrum ST4- V-Mount Run And Gun Bundle (ST417_RG_GM_DD14)
€3.790,00 *
* exkl. MwSt. zzgl. Versandkosten
eMotimo Spectrum ST4- Gold Mount Run And Gun Bundle (p/n ST417_RG_GM_DD14)
€3.890,00 *
* exkl. MwSt. zzgl. Versandkosten
eMotimo spectrum ST4 Run & Gun Bundle, smallest and lightest 4-axis bundle ...
€3.790,00 *
* exkl. MwSt. zzgl. Versandkosten
Already own a Spectrum ST4/ST4.3 or Conductor SA2.6 and a Dana Dolly? The eMotimo Dana Dolly Integration Kits includes almost everything you need to motorize your Dana Dolly for your Spectrum.
€545,00 *
* exkl. MwSt. zzgl. Versandkosten
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
€37,50 *
* exkl. MwSt. zzgl. Versandkosten
This is a DTAP to 2.1mm x 5.5mm barrel connector - center positive. The barrel connector is locking with a screw.
€49,00 *
* exkl. MwSt. zzgl. Versandkosten
Geared motor mount, Motor & Pully for Dana Dolly ...
€175,00 *
* exkl. MwSt. zzgl. Versandkosten
the ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
€875,00 *
* exkl. MwSt. zzgl. Versandkosten
CL-CB1, Olympus connector supports: Olympus: E1,E3,E10,E20,E30.
€24,50 *
* exkl. MwSt. zzgl. Versandkosten
CL-S1, Sony connector supports:

Sony a900, Sony a700, Sony a350, Sony a300, Sony a200, Sony a100, Sony a100K, a100,a77,a65,a57,a55,a37,a35,a33, a99
€24,50 *
* exkl. MwSt. zzgl. Versandkosten
* exkl. MwSt. zzgl. Versandkosten

Mission Statement

eMotimo is a small, passionate, hands-on company, driven to create the highest-value camera products on the market. We enable photographers and cinematographer of all levels, to produce their visions and capture their moments in motion!

History

eMotimo was inspired by techniques used in the filming of the documentary series, Planet Earth. How’d it all start? The founder, Brian, who has a strong background in photography and engineering, wanted to produce similar shots himself, but the technology and products on the market were too expensive and difficult to use. He set out to make his own.  eMotimo was born in 2010 and sold its first eMotimo PT in January 2011.

Values

We put a ton of our energy into creating our high-value, feature-heavy products.  We deliver what we promise.  We care deeply about customer service and the success of our users.   Our commitment to our community is long term.  We care about participation and work to have a voice in the camera/film/broadcast community.  We want to be a part of your kit – without ever locking you into a brand.  We focus on integration with other vendors.

Build quality

All eMotimo products are designed, assembled, and run through QA in our San Diego headquarters before they are shipped to you. We take a tremendous amount of pride in the quality of our products.  By assembling and testing them in our own shop, we can pay close attention to each and every part that goes out our door.

Future

We will continue to make products that push the camera/video/broadcast industry forward.  We are a team of creatives, inspired by creatives.  We are constantly evaluating new ideas and innovations to bring to our customers. We hope our products will continue to mix up the industry and enable users of all levels to do amazing things.

 

Wir benutzen Cookies nur für interne Zwecke um den Webshop zu verbessern. Ist das in Ordnung? Ja Nein Für weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x