Zacuto Zacuto Sony FS7 Recoil V2
Eigenschaften des Zacuto Sony FS7 Recoil:
- Komfortabel, ergonomisch und perfekt für die Sony PXW-FS7
- Inkl. VCT Universal Baseplate
- Inkl. Rosette Minimount
- Inkl. Axis Mini für die Sony FS7
- 1x Zacuto Sony FS7 Recoil rig
- 1x VCT Universal Baseplate
- 1x Rosette Minimount
- 1x Axis Mini
Das Zacuto Sony FS7 Recoil shoulder-mounted rig umfasst eine VCT Universal-Grundplatte, den Rosette Minimount Handgriff und die Axis Mini, die entweder mit dem Gratical HD oder dem Sony Monitor verwendet werden kann. Das Zacuto Recoil ist kompatibel mit der Sony PXW-FS7(K) und perfekt für den Schultereinsatz geeignet
: VCT Base Pro Plate
: Gratical-HD elektronischer OLED-Farbsucher
: Z-Drive Follow Focus
: VCT Tripod Plate Kamera-Basisplatte
: weiteres Zubehör gerne auf Anfrage.
Zacuto Z-S7R Overview
The Sony FS7 Recoil Kit from Zacuto is a shoulder-mounted rig includes the VCT Pro Baseplate and our Axis Mini for Sony FS7 which can be used with either the Gratical EVFs or the Sony monitor. You can relocate the Sony camera grip to the side of the VCT Pro Baseplate via M6 Rosette for optimal usability and comfort. The rig is designed for optimal balance and comfort when shoulder-mounted or on a tripod. With lenses and cameras being similar weights, the balance point is where the lens meets the camera body.
The VCT Pro Baseplate has a sliding top plate for quickly removing the camera from the rig or fast length changes. It also has a built-in, curved shoulder pad, a V-wedge tripod connector, a removable and extendable 6.5” iris rods and rows of 1/4"-20 screw holes along the sides for accessories. With quick release 15mm rod parts in the rear and recessed rod mount, this rig offers maximum accessory capable space under your camera lens.
The Axis Mini Mount attaches to the 15mm rod port on the Sony FS5 Top Plate to mount either a rosette mounted EVF like the Gratical HD or the Sony monitor (sold separately).
- VCT Pro Baseplate
With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.
A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1", and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.
The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.
An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4"-20 threaded holes on the side providing additional mounting options. 1/4"-20 and 3/8"-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4"-20 and one 3/8"-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.
- Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
- 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
- VCT14-compatible V-wedge
- 1/4"-20 and 3/8"-16 tripod mount holes
- Ergonomic gel polymer shoulder pad
- 15mm LWS rod adapter on the rear
- Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
- ARRI M6 rosette
- Three 1/4"-20 threaded holes for accessories
- Includes two 6.5" 15mm rods
- 1/4"-20 and 3/8"-16 screws supplied
- Made in the USA
- Axis Mini EVF Mount
A versatile and adjustable means for attaching a rosette-mounted EVF to your camera, the Zacuto Axis Mini is an ENG-style mount that is designed to attach to the top of your camera setup and provide you with ample room for adjusting focus or working with large lenses. It attaches directly to rigs fitted with a 15mm rod port and then connects with EVFs, such as the Gratical HD, using a secure 1/4"-20 rosette mount, or can also be used with 1/4"-20 screw mount EVFs with the separate Quad Rail for mounting.
Once attached, the Axis Mini's adjustable design utilizes four main pivoting points, which can spin a full 360° and are controlled using independent tension levers. With all levers unlocked, you can freely position the EVF at will using a single hand, or specific sections can be tightened down for fine-tuned adjustments on a single axis. Additionally, the articulation can be configured to work seamlessly with both shoulder-mounted rigs as well as for tripod-based shooting.