Steadicam Fawcett Exovest "Goofy" with Large Socket Block, #815-7800-03

Noch keine Bewertungen | Eigene Bewertung erstellen
Steadicam
€ 5.250,00 exkl. MwSt. zzgl. Versandkosten

Exovest "Goofy" with large socket block for compatibility with Archer, M-1, Shadow & Ultra2 ...

Lieferzeit:
3-4 Werktage
Artikelnummer::
ST 815-7800-03

Key Features:

  • Vest for Archer, M-1, Shadow & Ultra2
  • For Left-Handed Operators
  • Pivoting Exoskeletal Structure
  • Ergonomic Weight Transfer

Steadicam 815-7800-03 Overview

The Goofy Fawcett Exovest with Large Socket Block for left-handed operators from Steadicam is a semi-rigid exoskeletal vest designed to transfer the weight and torque of your Steadicam camera support system to anatomically appropriate areas without interfering with natural movement. Primary weight transfer is to the pelvis via four pads ergonomically placed around the waistband, and primary torque transfer is via a pad system at the upper back. Lower pads on the front and back avoid compressing the abdomen and the base of the spine. Upper pads avoid compressing the neck, shoulder joint, shoulder blades, and spine.

Crucially, the absence of chest straps allows for unrestricted breathing and arm movement. Pad systems are connected by rigid sliding components, and tightened by double- and triple-purchase straps for precise fit under load, so weight-bearing characteristics can be fine-tuned on the fly. The rigidity of the outer structure extends the torque-resisting lever-arm to high-shoulder level, halving the force required to counterbalance a Steadicam rig.

Symmetrical twin-rod spars rising from the waistband on the front and back increase the vertical range of the socket block and permit both front and rear arm mounting. Four integral pivots allow the vest to conform to natural body movements. The rise and fall of the hips as weight is shifted from one leg to the other is accommodated by a lower pivot system, so the socket block remains level and at the same height when walking. This results in less muscular strain and better overall stability and balance.

The Exovest's upper system allows for free movement of the shoulders, giving a feel of increased lightness and control. Between takes, the entire vest may be relaxed by means of one over-center lever, as the upper pad system beds in only under load.

: Large socket block for compatibility with Archer, M-1, Shadow & Ultra2

: Designed for left-handed operators

: Lighter and less constrictive than conventional vests, allowing for better respiration, circulation, transportation, and movement

: Especially comfortable for female operators

 

Compatibility : Archer, M-1, Shadow, Ultra2

Dimensions : 13 x 17 x 19" / 33.0 x 43.2 x 48.3 cm

Weight : 11 lb / 4.9 kg

 

Most customer Questions:

Im interested in a purchase of a steadicam vest and I would like to know, whats the difference between EXOVEST and GOOFY EXOVEST?

Answer:

Typically, the arm attaches to a Steadicam vest on the right side. Operators who prefer the arm to be on the left are referred to as Goofy, so a Goofy vest will have the arm socket block on the left instead of the right.

Exovest Fitting Guide

NAB 2014 - Tiffen - Steadicam Exovest

PDF download / manual

https://cdn.webshopapp.com/shops/268760/files/279970936/exovest-tiffen-manual.pdf

Garrett Brown, Inventor of Steadicam and Skycam & Chris Fawcett, Inventor (EG12)

Exovest demo at Steadicam Gold Workshop Malaysia

https://vimeo.com/46424840

 

Description:

The Steadicam Fawcett Exovest™ is a semi-rigid exoskeletal vest that transfers the weight and torque of supporting a Steadicam system into anatomically appropriate areas, without interfering with natural movement.

Primary weight transfer is to the pelvis via four pads ergonomically placed around the waistband, and primary torque transfer is via a pad system at the upper back. Lower pads avoid compressing the abdomen in front, and the base of the spine in back. Upper pads avoid compressing the neck, shoulder joint, shoulder blades, and spine. Crucially, the absence of chest straps allows for unrestricted breathing and arm movement.

Pad systems are connected by rigid sliding components, and tightened by double and triple-purchase straps for precise fit under load, so weight-bearing characteristics can be fine-tuned on the fly.

The exemplary rigidity of the outer structure extends the torque-resisting lever-arm from mid-back (on existing vests) to high-shoulder level—halving the force required to counterbalance a Steadicam rig.

Symmetrical twin-rod spars, rising fore and aft from the waistband, increase vertical range of the socket block and uniquely, permit both front and rear arm mounting.

Four integral pivots allow the vest to conform to natural body movements. The rise and fall of the hips as weight is shifted from one leg to the other is accommodated by a lower pivot system, so the socket block remains level, and at the same height when walking—resulting in less muscular strain, and better overall stability and balance. The upper system allows free movement of the shoulders.

The resultant feel is of increased lightness and control. Between takes, the entire vest may be relaxed by means of one over-center lever, as the upper pad system beds in only under load.

- - -  Videonachweis: von eg, Sound & Picture, Steadivision, Phil Balsdon - - -

Geschichte

 

0 Sterne basierend auf 0 Bewertungen Kundenmeinung hinzufügen
Wir benutzen Cookies nur für interne Zwecke um den Webshop zu verbessern. Ist das in Ordnung? Ja Nein Für weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x