The xPEG Rip-Tie also comes with a ⅜”-16 UNC threaded hole, if the user wishes to mount anything else on it (such as a eyebolt, for example).
A ZUD 1/4 20" male (retrofit any 1/4 20 female with Z-Release) is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm.
The Rigid nose mount is an accessory for the times where you need to lock up the roll/tilt movement for the Black arms head. Common use cases could be when the Black is mounted on to a motorcycle ...
300mm Front extension block. For the larger frame gimbals, you may need to extend the Black a little bit.
180mm Front extension block. For the larger frame gimbals, you may need to extend the Black a little bit.
Black Arm Tranquilizer Shore Pack 40 (24-49 lb)
BLK-TRANQ-ORING-PACK-40
BLK-TRANQ-ORING-PACK-40
The Pan Barrels are the links that run around the Tranquilizer, dampening the pan axis. Gimbals/remote heads with stronger pan motors needs stiffer Pan Barrels ...
The Pan Barrels are the links that run around the Tranquilizer, dampening the pan axis. Gimbals/remote heads with stronger pan motors needs stiffer Pan Barrels ...
Stub Mount for Black Arm Dampening System
Black Standard to Complete - Blk-Std-to-Cmpl
The Black Mitchell Nut is a Mitchell castle nut that is more narrow than most castle nuts, making it fit through the rods of our Female Mitchell mount.
Removable Mitchell Plate Hi Hat, Mitchell Plate to 100mm Bowl Adapter, Anti-Tip Brackets, Soft Polyurethane Track Wheels ...
150mm adapter for large camera heads that use a 150mm ball base for leveling. This is a quality, made in USA product that will also fit other standard Mitchell Mounts.
2 x DUO-C150P Batteries, 1 x VL-2000S Simultaneous Charger with 4 pin XLR DC Output (100W)
This is the ultimate bundle, the xARM and the xR3ACH. The xARM, being one of the smoothest arms on the market, and the added boom range and isolation of the xR3ACH will ensure a super smooth ride ready to take on almost any shot.
The xPEG is a hook that you mount on your cart, where you can hang your Steadicam arm.
The ezPEG is an attachment for your cart, where you can hang your Easyrig while not wearing it.
The ezPEG is an attachment for your cart, where you can hang your Easyrig while not wearing it.
These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals.
The Winter softshell cover is a neoprene cover that keeps your xARM performing at its best at sub-zero temperature ....
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
J-Bracket with 5/8" arm post designed for steadicam® M1 Gimbal- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® - ...
U-Bracket designed to be compatible with steadicam® M1 gimbalIt let you increase the distance from the arm post and the Sled handle ...
Compatible with all ArmX1 ever manufactured, it can let you mount the J-Bracket or U-Bracket (regular or upside-down) lower than 254mm / 10", respect standard ArmPost.
