Weight: 650g (1.43lbs), A threaded hole on the rear of bracket allows you to storage the T knob, The tool holder attached on the side of bracket ...
Gear ratio: 14:1 for Shark S1 Integration Kit - ST4MAC_SIK-DD, 14:1: Strong enough for video and timelapse - moves up most slopes.
M2-TSF - M2 Top Stage Flat with Dovetail Plate
Sale
M2-VLKIT (M2VLKIT) 2 Core Kit - V-Lock Base. Includes 1x M2 Flat Stage, 1x 1.58 Post, 1x Monitor Bracket, V-Lock Base, 1x Docking Bracket, 1x G-50X Arm and 1x Zephyr Vest (No Substitutions) ...
Multi-core CPU 6 sensors multi-axis digital level indicator, Powered via USB or pushpull connector with daisy chain possibility, Case milled from solid aluminum, shot-peened and hard anodized ..
Imicro hot swap plate with 2 x D-Tap, 1 x 45W USB-C PD Outputs. Can be used on IDX V-Lock charger for sequential charging.
Sale
J-Bracket with 5/8" arm post designed for GPI® PRO Sled- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ....
In The Box
2x Imicro-150P battery
1x VL-2X charger
2x Imicro-150P battery
1x VL-2X charger
B-Mount battery; 160Wh / 28V; 1 x D-Tap Output (72W /14.4V/5A);1 x USB-A Output; 1 x USB-C PD In/Out Socket (100W output) – 5V, 9V, 12V, 15V & 20V.
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum ST4/ST4.3 or the M1/M2 motor ports of the Conductor SA2.6
The working height of 58 cm to 115 cm also offers a perfect height range for dolly work. It is equipped with two inertial legs to facilitate leveling on uneven terrain such as hills, mountain slopes, rocky environments and stairs ...
A memory collar is included so you can quickly return to a previous height adjustment. A junior 1-1/8" receiver is welded to the top riser section to give you mounting flexibility.
If you have a compatible DJI Gimbal (RS2 and RS3) and an unmotorized Dana Dolly, this kit adds eMotimo's Dana Dolly integration kit.
Produces glowing highlights and a slight reduction in contrast for a more ethereal image appearance, Helps soften skin details, blemishes, and wrinkles ...
Compact version of Ultra vest, complete with socket block, cross back straps, emergency quick release. Fits thinner and also shorter operators, 4"10" to 5"9".
ArmX1 arm post with 1/2″ diameter and stickout of 140mm / 5.5″
Shooters wishing to add Z-axis isolation to their motorized three-axis gimbal setup can wear the medium GLINK Vest and Arm Stabilization System from Flowcine.
xARM Double-Section Articulated Stabilization Arm. Add a heavy-duty stabilization arm to your vest and gimbal rig with the xARM Double-Section Articulated Stabilization Arm from FLOWCINE to achieve smooth, professional motion shots.
Volt Control Box Rod Mount 60mm x 15mm, For mounting the external Volt Control Box to 15mm bars ...
Steadicam padded dock allows for docking your sled around the gimbal handle, securely fixing with a lockable lever grip.
padded dock allows for docking your sled around the gimbal handle, securely fixing with a lockable lever grip.
usable with FGS-900045 Heavy Duty Stand from Steadicam ....
825-7300-01
825-7300-01
The STABIL-arm can lift camera setups between 5-25 kg / 11-55 lbs. ...
3 modes of digital data accessing function: IDX mode, SM-Bus mode, and S-type (non-digital) mode ...
