Dana Dolly 6" Riser. Adds 6" Camera Height for shots that require the camera to be a little higher on the track.
Allows the adapter to be mounted to the Dana Dolly, May not work with Non-Dana Dolly sliders. Important to check 65mm and not 75mm ball.
Dana Dolly "Universal" Track End works with any standard size pipe from 1 1/4" to 1 1/2" (1.66" O.D. to 1.9" O.D.)
Dana Dolly Felt Washer Set of 4
Dana Dolly adapter that fits the Sachtler 100mm Aktiv 10 fluid head.
Full Size Socket block for Steadicam vests, vehicle mounts etc.
Replacement Pull Pin for \LX and Zephyr/Aero30 Vest.
Press fit. 1x supplied. *You will need a mechanical press or vice to install this item.
Press fit. 1x supplied. *You will need a mechanical press or vice to install this item.
The Volt Rain Cover is designed to protect your Volt and Gimbal from the elements, while allowing you to operate your Steadicam. Made from motorcycle grade, waterproof fabric, with Velcro seals. Fits all sled posts 1.5”-1.85”
The SL-F50 is designed after the form factor of the Sony L series (NP-F) and has a capacity of 48 watt hours ...
Mechanical follow focus system with 15mm tube mount for remote focus control on lenses
For Dana Dolly Portable Dolly System, Holds Standard 1 1/4" to 1 1/2" Pipe, Supported by Junior or Baby Stands
Dana Dolly Mitchell to 100mm Ball Adapter is an adapter that allows you to mount a video head with a 100mm leveling ball ...
Highlights: Dana Dolly Hi Hat Slider, 2-Universal Track Ends, 75mm,100mm,150mm Ball Adapter, Monitor Mount ...
additional digital board SDI IN / OUT ...
Portable Dolly System w/ Universal Track Ends - 100 & 150mm Bowl Adapters
Removable Mitchell Plate Hi Hat, Mitchell Plate to 100mm Bowl Adapter, Anti-Tip Brackets, Soft Polyurethane Track Wheels ...
Sale
2 Ch. Sequential Fast Charger for NP Li-ion & NiCd with built-in AC Adaptor (60W)
Counterweight designed to add mass on the bottom of your Matrix Sled if necessary. Every counterweight has a weight of 250gr / 0.5lbs (M4 screw included)Please note that the image is for reference and the color of the counterweight could be different ...
C-BATTERY V-LOCK MOUNT W/ ADAPTER
Sale
The carrying capacity remains unchanged at 2 - 7 kg.
Sale
with vest, 33 cm long boom & transport bag for camera equipment between approx. 5 - 17 kg ...
Sale
The A-DCFX9 is a V-Mount adapter specifically designed for the Sony PXW-FX9.
This is an an easy and inexpensive solution for mounting the spectrum ST4 ...
Custom ordered belt length, cut to order. Width is 3/8", or about 9.5mm ...
