Monitor rods with clamp designed to fit Matrix sled posts (1.57" / 40mm)The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Sale
J-Bracket with 5/8" arm post designed for steadicam® M2 Gimbal- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ...
U-Bracket designed to be compatible with steadicam® M1 gimbalIt let you increase the distance from the arm post and the Sled handle ...
Professional gimbal with dual bearings configuration for every axis
Reduce to zero the play of the yaw axis when the in-built Ronin2 locking system is engaged.
Dual battery pack for 3Studs Batteries with integrated electronics ...
ARM POST 5/8IN – STICK OUT 90MM / 3.5IN
3Studs plate addon kit for SmartSystem monitor. It includes a jumper cable from DTAP to monitor.
It minimize the oscillation of Zen due to improper installation granting a more stable behavior especially on low mode.
It can be used to power the following products
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Monitor rods with clamp designed to fit 2.00" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
V-lock Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY
Additional bracket for Matrix Sled for a safe and decoupled connection for low mode monitor.Compatible only with M8 d.15 threaded carbon fiber rods.Distance Center-to-Center = 60mmNOTE: no rods are included in this package
comes with: 15mm carbon fiber rods with embedded battery joint, Locking knob, Nylon washer
U-Bracket designed to be compatible with steadicam® M2 gimbalIt let you increase the distance from the arm post and the Sled handle ...
Technical Note : In case of emergency, it can be replaced with a commercial knob with M6 x10 threading
Counterweight designed to add mass on the bottom of your Matrix Sled if necessary. Every counterweight has a weight of 250gr / 0.5lbs (M4 screw included)Please note that the image is for reference and the color of the counterweight could be different ...
Designed for Carbon rods with a diameter of 15mm, Center-to-center distance : 100mm
ARM POST 5/8IN – STICK OUT 40MM / 1.5IN
ARM POST 3/4IN – STICK OUT 90MM / 3.5IN
ARM POST 3/4IN – STICK OUT 190MM / 7.5IN
SmartSystem produces professional Stabilizers, X1 Arm, advanced Motion Control for Film Makers and Video Makers, Camera Slider, Camera Dollies ...
