Monitor rods with clamp designed to fit 1.75" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Bracket specifically design to grant a stable and vibration-free connection between Volt® Brain and Matrix top stage ...
U-Bracket designed to be compatible with steadicam® M1 gimbalIt let you increase the distance from the arm post and the Sled handle ...
U-Bracket designed to be compatible with GPI® PRO Sled gimbalIt let you increase the distance from the arm post and the Sled handle giving to you more headroom to install your preferred monitor on this last one
Professional gimbal with dual bearings configuration for every axis
Engineered to be lightweight as ultra stable.
LCD Monitor Attachment derived from Matrix Sled.
C-BATTERY V-LOCK MOUNT W/ ADAPTER
A fully insulated Rain Suit for ArmX1.
ARM POST 5/8IN – STICK OUT 40MM / 1.5IN
ARM POST 5/8IN – STICK OUT 140MM / 5.5IN
ARM POST 3/4IN – STICK OUT 140MM / 5.5IN
ARM POST 1/2IN – STICK OUT 40MM / 1.5IN
Additional MiniClamp for Zen PRO Core, designed to accommodate rods measuring 19mm (0.75 inches). SKU: 000010273
Universal camera plate compatible with most sleds on the market. Equipped with safety locking screws. Total compatibility with VersaHead. Length: 16inches (406mm), Weight: 9.7 oz (275 gr.) ...
Compatible arms:
– SmartSystem Arm X1
– PRO® GPI® Titan® and Atlas® Arms
– FlowCine® XArm®
– Tiffen steadicam® arms with 5/8 arm post
– SmartSystem Arm X1
– PRO® GPI® Titan® and Atlas® Arms
– FlowCine® XArm®
– Tiffen steadicam® arms with 5/8 arm post
Designed to seamlessly integrate with your existing monitor mount, this kit allows for a more aligned and vertical positioning of your LCD monitor. Enjoy improved viewing angles and a more streamlined setup for your Matrix Sled.
Universal camera plate compatible with most sleds on the market. Equipped with safety locking screws. Total compatibility with VersaHead ...
The XTDongle enables seamless connectivity between PCs or Macs and any XTBus-compliant device, allowing you to fully utilize the new port capabilities.
It can be used to power the following products
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
it matches perfectly the weight of the standard counterweight with the ability to precisely tuning the position of the outer bell increasing the momentum on the gimbal handle.
Monitor rods with clamp designed to fit 2.00" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.5" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.37" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
SmartSystem produces professional Stabilizers, X1 Arm, advanced Motion Control for Film Makers and Video Makers, Camera Slider, Camera Dollies ...
