V-Lock plate addon kit for SmartSystem monitor, It includes a jumper cable from DTAP to monitor ...
It can be used to power the following products
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
15mm high modulus Carbon Fiber rod.M8 male front threaded for a stable connection with Matrix Threaded bracket
NOTE : This product is composed by 1 single rod.
NOTE : This product is composed by 1 single rod.
it matches perfectly the weight of the standard counterweight with the ability to precisely tuning the position of the outer bell increasing the momentum on the gimbal handle.
Additional Chest pad compatible with Vest Lite.Washing machine proof
Monitor rods with clamp designed to fit Matrix sled posts (1.57" / 40mm)The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 2.00" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.75" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.37" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
3Studs Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY
Additional bracket for Matrix Sled for a safe and decoupled connection for low mode monitor.Compatible only with M8 d.15 threaded carbon fiber rods.Distance Center-to-Center = 60mmNOTE: no rods are included in this package
ArmX1 arm post with 1/2″ diameter and stickout of 140mm / 5.5″
comes with: 15mm carbon fiber rods with embedded battery joint, Locking knob, Nylon washer
U-Bracket designed to be compatible with steadicam® M2 gimbalIt let you increase the distance from the arm post and the Sled handle ...
Professional gimbal with dual bearings configuration for every axis
Counterweight plate with 10x counterweights included specifically designed
LCD Monitor Attachment derived from Matrix Sled.
Equipped with Gimbal lock (including retaining pin)
Plastic Gimbal
5/8" pin to balance your Sled
Support for vest
Support for Arm
Plastic Gimbal
5/8" pin to balance your Sled
Support for vest
Support for Arm
MATRIX DOVETAIL CAMERA PLATE [STANDARD], Length : 6.7inches (170mm)
Especially designed for Matrix R2 Lite in “Ronity” configuration
MONITOR MOUNT W/RODS (40MM / 1.575″ POST
C-Battery with ThreeStuds Mount is the necessary accessory for Matrix Sled to grant to you the possibility to mount ...
SmartSystem produces professional Stabilizers, X1 Arm, advanced Motion Control for Film Makers and Video Makers, Camera Slider, Camera Dollies ...
