CF RING FOOT 3 feet - g-Foot-3
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Holds GLINK Upright without Stand, 1/4"-20 and 3/8"-16 Female Threads, Clamps to Bottom CF Ring, Designed for GLINK Stabilization System ...
The xARM is based on polymer spring cores with a outer shell of Neoprene. Each spring core has a smooth and linear lifting capacity and when being used near their maximum ...
The xDROP, is a new male socket block-to-female socket block connection bracket, that drops the arm connection to the vest approx 85mm or 3.4″ and offsets the same connection to the side 55mm or 2.2″.
The xPEG Rip-Tie also comes with a ⅜”-16 UNC threaded hole, if the user wishes to mount anything else on it (such as a eyebolt, for example).
The Rigid nose mount is an accessory for the times where you need to lock up the roll/tilt movement for the Black arms head. Common use cases could be when the Black is mounted on to a motorcycle ...
300mm Front extension block. For the larger frame gimbals, you may need to extend the Black a little bit.
100mm Front extension block. For the larger frame gimbals, you may need to extend the Black a little bit.
Tranquilizer O-ring pack shore 20
Black Arm Tranquilizer Shore Pack 20 (12-23 lb)
Black Arm Tranquilizer Shore Pack 20 (12-23 lb)
Black Arm Tranquilizer Shore Pack 50 (30-60 lb)
Tranquilizer O-ring pack shore 50
Tranquilizer O-ring pack shore 50
The Pan Barrels are the links that run around the Tranquilizer, dampening the pan axis. Gimbals/remote heads with stronger pan motors needs stiffer Pan Barrels ...
The Pan Barrels are the links that run around the Tranquilizer, dampening the pan axis. Gimbals/remote heads with stronger pan motors needs stiffer Pan Barrels ...
Black Standard to Complete - Blk-Std-to-Cmpl
The Black Mitchell Nut is a Mitchell castle nut that is more narrow than most castle nuts, making it fit through the rods of our Female Mitchell mount.
150mm adapter for large camera heads that use a 150mm ball base for leveling. This is a quality, made in USA product that will also fit other standard Mitchell Mounts.
This is the ultimate bundle, the xARM and the xR3ACH. The xARM, being one of the smoothest arms on the market, and the added boom range and isolation of the xR3ACH will ensure a super smooth ride ready to take on almost any shot.
This is the ultimate bundle, the xARM and the xR3ACH. The xARM, being one of the smoothest arms on the market, and the added boom range and isolation of the xR3ACH will ensure a super smooth ride ready to take on almost any shot.
This is the ultimate bundle, the xARM and the xR3ACH. The xARM, being one of the smoothest arms on the market, and the added boom range and isolation of the xR3ACH will ensure a super smooth ride ready to take on almost any shot.
The xPEG is a hook that you mount on your cart, where you can hang your Steadicam arm.
The xARM Waterproof cover, is our thinnest and softest cover for the xARM. Its inner fleece material keeps the xARM intact from anything that might rub against it.
The adaption plate is a super slim top cheese plate that will enable you to put the balancing stage anywhere on top of your Arri Alexa/XT.
The Serene Tough bands are for everyone that shoots on a very heavy setup.
The patent pending 2-axis Puppeteer is an anti-vibration mount made to eliminate the motion coming from the Easyrig cord while walking or running.
These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals.
